Server IP : 172.67.171.101 / Your IP : 216.73.216.123
Web Server : Apache
System : Linux server1.morocco-tours.com 3.10.0-1127.19.1.el7.x86_64 #1 SMP Tue Aug 25 17:23:54 UTC 2020 x86_64
User : zagoradraa ( 1005)
PHP Version : 7.4.33
Disable Function : NONE
MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : ON
Directory : /usr/share/mibs/ietf/ |
Upload File : |
| Current File : /usr/share/mibs/ietf/SNA-SDLC-MIB |
SNA-SDLC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, TimeTicks
FROM SNMPv2-SMI
DisplayString, RowStatus, TimeInterval
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
mib-2, ifIndex, ifAdminStatus, ifOperStatus
FROM RFC1213-MIB;
snaDLC MODULE-IDENTITY
LAST-UPDATED "9411150000Z"
ORGANIZATION "IETF SNA DLC MIB Working Group"
CONTACT-INFO
" Wayne Clark
Postal: cisco Systems, Inc.
3100 Smoketree Ct.
Suite 1000
Raleigh, NC 27604
US
Tel: +1 919 878 6958
E-Mail: wclark@cisco.com"
DESCRIPTION
"This is the MIB module for objects used to
manage SDLC devices."
::= { mib-2 41 }
--
-- The following data link controls are modelled in this MIB module:
--
-- 1. SDLC
--
sdlc OBJECT IDENTIFIER ::= { snaDLC 1 }
--
-- THE SDLC GROUP
-- ==============
--
-- The following resources are modelled in the SDLC group of this
-- MIB module:
--
-- 1. PORTS
-- 2. LINK STATIONS
sdlcPortGroup OBJECT IDENTIFIER ::= { sdlc 1 } -- Physical Ports
sdlcLSGroup OBJECT IDENTIFIER ::= { sdlc 2 } -- Logical Link Stations
--
-- THE SDLC PORT GROUP
-- ===================
--
-- The following classes of information is modelled for each SDLC port:
--
-- 1. ADMINISTRATIVE ( read/write)
-- 2. OPERATIONAL ( read-only)
-- 3. STATISTICS ( read-only)
-- Information not found in this group is found in tables described in
-- the following RFCs:
--
-- 1. RFC1213 - MIB-II
--
-- TABLE INDEX
-- ==================== ====================
-- a. ifTable ifIndex
--
-- 2. RFC1659 - The RS232-like MIB
--
-- TABLE INDEX
-- ==================== ====================
-- a. rs232PortTable rs232PortIndex
-- b. rs232SyncPortTable rs232SyncPortIndex
-- c. rs232InSigTable rs232InSigPortIndex,
-- rs232InSigName
-- d. rs232OutSigTable rs232OutSigPortIndex,
-- rs232OutSigName
-- ** e. rs232AsyncPortTable rs232AsyncPortIndex
--
-- ** rs232AsyncPortTable for ISO 3309.3 ( Start-Stop SDLC).
-- *************************************************************
-- * *
-- * THE SDLC PORT ADMINISTRATIVE TABLE *
-- * *
-- *************************************************************
sdlcPortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcPortAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects that can be
changed to manage an SDLC port. Changing one
of these parameters may take effect in the
operating port immediately or may wait until
the interface is restarted depending on the
details of the implementation.
Most of the objects in this read-write table
have corresponding read-only objects in the
sdlcPortOperTable that return the current
operating value.
The operating values may be different from
these configured values if a configured
parameter was changed after the interface was
started."
::= { sdlcPortGroup 1 }
sdlcPortAdminEntry OBJECT-TYPE
SYNTAX SdlcPortAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configured values for an SDLC port."
INDEX { ifIndex }
::= { sdlcPortAdminTable 1 }
SdlcPortAdminEntry ::= SEQUENCE
{
sdlcPortAdminName DisplayString,
sdlcPortAdminRole INTEGER,
sdlcPortAdminType INTEGER,
sdlcPortAdminTopology INTEGER,
sdlcPortAdminISTATUS INTEGER,
sdlcPortAdminACTIVTO TimeInterval,
sdlcPortAdminPAUSE TimeInterval,
sdlcPortAdminSERVLIM Integer32,
sdlcPortAdminSlowPollTimer TimeInterval
}
sdlcPortAdminName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string that defines the physical port
to which this interface is assigned. It has
implementation-specific significance. Its value
shall be unique within the administered
system. It must contain only ASCII printable
characters. Should an implementation choose to
accept a write operation for this object, it
causes the logical port definition associated
with the table instance to be moved to a
different physical port. A write operation
shall not take effect until the port is cycled
inactive."
::= { sdlcPortAdminEntry 1 }
sdlcPortAdminRole OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
negotiable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the role that the link
station shall assume the next time a connection
is established.
Even though this is defined as a port object,
it is a link station attribute in the sense
that a role is per link station. However, it
is not possible to vary link station roles on a
particular port. For example, if an SDLC port
is configured to primary, all link stations on
that port must be primary."
::= { sdlcPortAdminEntry 2 }
sdlcPortAdminType OBJECT-TYPE
SYNTAX INTEGER
{
leased(1),
switched(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether the SDLC port
is to connect to a leased or switched line. A
write operation to this administrative value
shall not take effect until the SDLC port has
been cycled inactive."
DEFVAL { leased }
::= { sdlcPortAdminEntry 3 }
sdlcPortAdminTopology OBJECT-TYPE
SYNTAX INTEGER
{
pointToPoint(1),
multipoint(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether the SDLC port is
capable of operating in either a point-to-point
or multipoint topology.
sdlcPortAdminTopology == multipoint implies the
port can also operate in a point-to-point
topology. sdlcPortAdminTopology ==
pointToPoint does not imply the port can
operate in a multipoint topology.
A write operation to this administrative value
shall not take effect until the SDLC port has
been cycled inactive."
DEFVAL { pointToPoint }
::= { sdlcPortAdminEntry 4 }
sdlcPortAdminISTATUS OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter controls the initial value of
the administrative status, ifAdminStatus, of
this SDLC port at port start-up. Depending
on the implementation, a write operation to
this administrative object may not take effect
until the SDLC port has been cycled inactive."
DEFVAL { active }
::= { sdlcPortAdminEntry 5 }
sdlcPortAdminACTIVTO OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the period of time (in
1/100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred. A value of zero indicates no
timeout. Depending on the implementation, a
write operation to this administered value may
not take effect until the port is cycled
inactive.
This object only has meaning for SDLC ports
where sdlcPortAdminType == switched
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds."
DEFVAL { 0 }
::= { sdlcPortAdminEntry 6 }
sdlcPortAdminPAUSE OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the minimum elapsed time
(in 1/100ths of a second) between any two
traversals of the poll list for a primary SDLC
port. Depending on the implementation, a write
operation to this administered value may not
take effect until the port is cycled inactive.
The object descriptor contains the name of an
NCP configuration parameter, PAUSE. Please
note that the value of this object represents
1/100ths of a second while the NCP PAUSE is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where sdlcPortAdminRole == primary "
DEFVAL { 200 }
::= { sdlcPortAdminEntry 7 }
sdlcPortAdminSERVLIM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the number of times the
active poll list will be traversed before
polling a station on the slow poll list for a
primary, multipoint SDLC port. Depending on
the implementation, a write operation to this
administered value may not take effect until
the port is cycled inactive.
This object only has meaning for SDLC ports
where
sdlcPortAdminRole == primary
and
sdlcPortAdminTopology == multipoint "
DEFVAL { 20 }
::= { sdlcPortAdminEntry 8 }
sdlcPortAdminSlowPollTimer OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses. Depending
on the implementation, a write operation to
this administered value may not take effect
until the port is cycled inactive.
This object only has meaning for SDLC ports
where
sdlcPortAdminRole == primary
and
sdlcPortAdminTopology == multipoint "
DEFVAL { 2000 }
::= { sdlcPortAdminEntry 9 }
-- *************************************************************
-- * *
-- * THE SDLC PORT OPERATIONAL TABLE *
-- * *
-- *************************************************************
sdlcPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcPortOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current SDLC port
parameters. Many of these objects have
corresponding objects inthe sdlcPortAdminTable."
::= { sdlcPortGroup 2 }
sdlcPortOperEntry OBJECT-TYPE
SYNTAX SdlcPortOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Currently set parameters for a specific SDLC
port."
INDEX { ifIndex }
::= { sdlcPortOperTable 1 }
SdlcPortOperEntry ::= SEQUENCE
{
sdlcPortOperName DisplayString,
sdlcPortOperRole INTEGER,
sdlcPortOperType INTEGER,
sdlcPortOperTopology INTEGER,
sdlcPortOperISTATUS INTEGER,
sdlcPortOperACTIVTO TimeInterval,
sdlcPortOperPAUSE TimeInterval,
sdlcPortOperSlowPollMethod INTEGER,
sdlcPortOperSERVLIM Integer32,
sdlcPortOperSlowPollTimer TimeInterval,
sdlcPortOperLastModifyTime TimeTicks,
sdlcPortOperLastFailTime TimeTicks,
sdlcPortOperLastFailCause INTEGER
}
sdlcPortOperName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string that describes the physical
port to which this interface is currently
attached. It has implementation-specific
significance."
::= { sdlcPortOperEntry 1 }
sdlcPortOperRole OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
undefined(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the role that the link
station has assumed on this connection.
Even though this is defined as a port object,
it is a link station attribute in the sense
that a role is per link station. However, it
is not possible to vary link station roles on a
particular port. For example, if an SDLC port
is configured to primary, all link stations on
that port must be primary.
The value of sdlcPortOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command."
::= { sdlcPortOperEntry 2 }
sdlcPortOperType OBJECT-TYPE
SYNTAX INTEGER
{
leased(1),
switched(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter defines whether the SDLC port
is currently operating as though connected to a
leased or switched line."
::= { sdlcPortOperEntry 3 }
sdlcPortOperTopology OBJECT-TYPE
SYNTAX INTEGER
{
pointToPoint(1),
multipoint(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter defines whether the SDLC port is
currently operating in a point-to-point or
multipoint topology."
::= { sdlcPortOperEntry 4 }
sdlcPortOperISTATUS OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter describes the initial value of
the administrative status, ifAdminStatus, of
this SDLC port at last port start-up."
::= { sdlcPortOperEntry 5 }
sdlcPortOperACTIVTO OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout."
::= { sdlcPortOperEntry 6 }
sdlcPortOperPAUSE OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the current minimum
elapsed time (in 1/100ths of a second) between
any two traversals of the poll list for a
primary SDLC port.
The object descriptor contains the name of an
NCP configuration parameter, PAUSE. Please
note that the value of this object represents
1/100ths of a second while the NCP PAUSE is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where
sdlcPortAdminRole == primary "
::= { sdlcPortOperEntry 7 }
sdlcPortOperSlowPollMethod OBJECT-TYPE
SYNTAX INTEGER
{
servlim(1),
pollpause(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the exact method that is in
effect for periodically polling failed secondary
link station addresses.
If sdlcPortOperSlowPollMethod == servlim, then
sdlcPortOperSERVLIM defines the actual polling
characteristics.
If sdlcPortOperSlowPollMethod == pollpause,
then sdlcPortOperSlowPollTimer defines the
actual polling characteristics.
If sdlcPortOperSlowPollMethod == other, then
the polling characteristics are modeled in
vendor-specific objects.
This object only has meaning for SDLC ports
where
sdlcPortOperRole == primary
and
sdlcPortOperTopology == multipoint "
::= { sdlcPortOperEntry 8 }
sdlcPortOperSERVLIM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the number of times the
active poll list is currently being traversed
before polling a station on the slow poll list
for a primary, multipoint SDLC port.
This object only has meaning for SDLC ports
where
sdlcPortOperRole == primary
and
sdlcPortOperTopology == multipoint "
::= { sdlcPortOperEntry 9 }
sdlcPortOperSlowPollTimer OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses.
This object only has meaning for SDLC ports
where
sdlcPortOperRole == primary
and
sdlcPortOperTopology == multipoint "
::= { sdlcPortOperEntry 10 }
sdlcPortOperLastModifyTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero."
::= { sdlcPortOperEntry 11 }
sdlcPortOperLastFailTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the value of sysUpTime
when this SDLC port last failed. If the port
has not failed, then this value shall be zero."
::= { sdlcPortOperEntry 12 }
sdlcPortOperLastFailCause OBJECT-TYPE
SYNTAX INTEGER
{
undefined(1),
physical(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This enumerated object describes the cause of
the last failure of this SDLC port. If the
port has not failed, then this object has a
value of undefined(1)."
DEFVAL { undefined }
::= { sdlcPortOperEntry 13 }
-- *************************************************************
-- * *
-- * THE SDLC PORT STATISTICS TABLE *
-- * *
-- *************************************************************
sdlcPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains statistics
for a specific SDLC port."
::= { sdlcPortGroup 3 }
sdlcPortStatsEntry OBJECT-TYPE
SYNTAX SdlcPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for an SDLC port."
INDEX { ifIndex }
::= { sdlcPortStatsTable 1 }
SdlcPortStatsEntry ::= SEQUENCE
{
sdlcPortStatsPhysicalFailures Counter32,
sdlcPortStatsInvalidAddresses Counter32,
sdlcPortStatsDwarfFrames Counter32,
sdlcPortStatsPollsIn Counter32,
sdlcPortStatsPollsOut Counter32,
sdlcPortStatsPollRspsIn Counter32,
sdlcPortStatsPollRspsOut Counter32,
sdlcPortStatsLocalBusies Counter32,
sdlcPortStatsRemoteBusies Counter32,
sdlcPortStatsIFramesIn Counter32,
sdlcPortStatsIFramesOut Counter32,
sdlcPortStatsOctetsIn Counter32,
sdlcPortStatsOctetsOut Counter32,
sdlcPortStatsProtocolErrs Counter32,
sdlcPortStatsActivityTOs Counter32,
sdlcPortStatsRNRLIMITs Counter32,
sdlcPortStatsRetriesExps Counter32,
sdlcPortStatsRetransmitsIn Counter32,
sdlcPortStatsRetransmitsOut Counter32
}
sdlcPortStatsPhysicalFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of times
this port has failed due to its physical media
since port startup. At port startup time,
this object must be initialized to zero."
::= { sdlcPortStatsEntry 1 }
sdlcPortStatsInvalidAddresses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
frames received by this port with invalid link
station addresses."
::= { sdlcPortStatsEntry 2 }
sdlcPortStatsDwarfFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
frames received by this port which were
delivered intact by the physical layer but were
too short to be legal.
Ignoring the frame check sequence (FCS), a
frame is considered to be too short if it
is less than 2 bytes for sdlcLSOperMODULO of
eight, or if it is less than 3 bytes for
sdlcLSOperMODULO of onetwentyeight."
::= { sdlcPortStatsEntry 3 }
sdlcPortStatsPollsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of polls
received by this port since the port was
created."
::= { sdlcPortStatsEntry 4 }
sdlcPortStatsPollsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of polls
sent by this port since the port was created."
::= { sdlcPortStatsEntry 5 }
sdlcPortStatsPollRspsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of poll
responses received by this port since the port
was created."
::= { sdlcPortStatsEntry 6 }
sdlcPortStatsPollRspsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of poll
responses sent by this port since the port was
created."
::= { sdlcPortStatsEntry 7 }
sdlcPortStatsLocalBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the local SDLC link stations on
this port have entered a busy state (RNR).
This object is initialized to zero when the
port is created."
::= { sdlcPortStatsEntry 8 }
sdlcPortStatsRemoteBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the adjacent (i.e., remote) SDLC
link stations on this port have entered a busy
state (RNR). This object is initialized to
zero when the port is created."
::= { sdlcPortStatsEntry 9 }
sdlcPortStatsIFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
I-Frames that have been received by SDLC link
stations on this port. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 10 }
sdlcPortStatsIFramesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
I-Frames that have been transmitted by SDLC
link stations on this port. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 11 }
sdlcPortStatsOctetsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total octets
received from adjacent SDLC link stations on
this port. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the port is created."
::= { sdlcPortStatsEntry 12 }
sdlcPortStatsOctetsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total octets
transmitted to adjacent SDLC link stations on
this port. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the port is created."
::= { sdlcPortStatsEntry 13 }
sdlcPortStatsProtocolErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the SDLC link stations on this port
have deactivated the link as a result of
having received a protocol violation from the
adjacent link station. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 14 }
sdlcPortStatsActivityTOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the SDLC link stations on this port
have deactivated the link as a result of no
activity on the link. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 15 }
sdlcPortStatsRNRLIMITs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the SDLC link stations on this port
have deactivated the link as a result of its
RNRLIMIT timer expiring. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 16 }
sdlcPortStatsRetriesExps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
times that the SDLC link stations on this port
have deactivated the link as a result of a
retry sequence being exhausted. This object
is initialized to zero when the port is
created."
::= { sdlcPortStatsEntry 17 }
sdlcPortStatsRetransmitsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
I-Frames retransmitted by remote link stations
for all SDLC link stations on this port. This
object is initialized to zero when the port is
created."
::= { sdlcPortStatsEntry 18 }
sdlcPortStatsRetransmitsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
I-Frames retransmitted by all local SDLC link
stations on this port. This object is
initialized to zero when the port is created."
::= { sdlcPortStatsEntry 19 }
--
-- THE SDLC LINK STATION GROUP
-- ===========================
--
-- The following classes of information is modelled for each SDLC link
-- station:
--
-- 1. ADMINISTRATIVE ( read-write)
-- 2. OPERATIONAL ( read-only)
-- 3. STATISTICS ( read-only)
-- *************************************************************
-- * *
-- * THE SDLC LINK STATION ADMINISTRATIVE TABLE *
-- * *
-- *************************************************************
sdlcLSAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcLSAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects that can be
changed to manage an SDLC link station.
Changing one of these parameters may take
effect in the operating link immediately or may
wait until the link is restarted depending on
the details of the implementation.
The entries in sdlcLSAdminTable can be created
either by an agent or a management station. The
management station can create an entry in
sdlcLSAdminTable by setting the appropriate
value in sdlcLSAdminRowStatus.
Most of the objects in this read-create table
have corresponding read-only objects in the
sdlcLSOperTable that reflect the current
operating value.
The operating values may be different from
these configured values if changed by XID
negotiation or if a configured parameter was
changed after the link was started."
::= { sdlcLSGroup 1 }
sdlcLSAdminEntry OBJECT-TYPE
SYNTAX SdlcLSAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configured values for an SDLC link
station."
INDEX { ifIndex, sdlcLSAddress }
::= { sdlcLSAdminTable 1 }
SdlcLSAdminEntry ::= SEQUENCE
{
sdlcLSAddress INTEGER,
sdlcLSAdminName DisplayString,
sdlcLSAdminState INTEGER,
sdlcLSAdminISTATUS INTEGER,
sdlcLSAdminMAXDATASend Integer32,
sdlcLSAdminMAXDATARcv Integer32,
sdlcLSAdminREPLYTO TimeInterval,
sdlcLSAdminMAXIN INTEGER,
sdlcLSAdminMAXOUT INTEGER,
sdlcLSAdminMODULO INTEGER,
sdlcLSAdminRETRIESm INTEGER,
sdlcLSAdminRETRIESt TimeInterval,
sdlcLSAdminRETRIESn Integer32,
sdlcLSAdminRNRLIMIT TimeInterval,
sdlcLSAdminDATMODE INTEGER,
sdlcLSAdminGPoll INTEGER,
sdlcLSAdminSimRim INTEGER,
sdlcLSAdminXmitRcvCap INTEGER,
sdlcLSAdminRowStatus RowStatus
}
sdlcLSAddress OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port."
::= { sdlcLSAdminEntry 1 }
sdlcLSAdminName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An octet string that defines the local name of
the SDLC link station. This field may be sent
in the XID3 control vector 0x0E, type 0xF7."
::= { sdlcLSAdminEntry 2 }
sdlcLSAdminState OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
active(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the desired state of the
SDLC station. The managed system shall attempt
to keep the operational state, sdlcLSOperState,
consistent with this value."
DEFVAL { active }
::= { sdlcLSAdminEntry 3 }
sdlcLSAdminISTATUS OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
active(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter controls the desired state,
sdlcLSAdminState, of the SDLC link station at
link station start-up."
DEFVAL { active }
::= { sdlcLSAdminEntry 4 }
sdlcLSAdminMAXDATASend OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the maximum PDU size that
the local link station thinks it can send to
the adjacent link station before having
received any XID from the ALS. After the
maximum PDU size that the ALS can receive is
known (via XID exchange) that value is
reflected in sdlcLSOperMAXDATASend and takes
precedence over this object.
This value includes the Transmission Header
(TH) and the Request Header (RH)."
::= { sdlcLSAdminEntry 5 }
sdlcLSAdminMAXDATARcv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the maximum PDU size that
the local link station can receive from the
adjacent link station. This value is sent in
the XID to the ALS.
This value includes the Transmission Header
(TH) and the Request Header (RH)."
::= { sdlcLSAdminEntry 6 }
sdlcLSAdminREPLYTO OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the reply timeout (in
1/100ths of a second) for an SDLC link
station. If the link station does not receive
a response to a poll or message before the
specified time expires then the appropriate
error recovery shall be initiated.
The object descriptor contains the name of an
NCP configuration parameter, REPLYTO. Please
note that the value of this object represents
1/100ths of a second while the NCP REPLYTO is
represented in 1/10ths of a second.
Depending on the implementation, a write
operation to this administered value may not
change the operational value, sdlcLSOperREPLYTO,
until the link station is cycled inactive.
This object only has meaning for SDLC ports
where sdlcPortAdminRole == primary "
DEFVAL { 100 }
::= { sdlcLSAdminEntry 7 }
sdlcLSAdminMAXIN OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the maximum number of
unacknowledged I-frames which an SDLC link
station may receive. This should range from 1
to (sdlcLSAdminMODULO - 1). This value is sent
in the XID to the ALS.
A write operation to this administered value
will not change the operational value,
sdlcLSOperMAXIN, until the link station is
cycled inactive."
DEFVAL { 7 }
::= { sdlcLSAdminEntry 8 }
sdlcLSAdminMAXOUT OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
For link stations on switched SDLC lines,
certain implementions may choose to override
this administered value with the value
received in the XID exchange.
Depending on the implementation, a write
operation to this administered value may not
change the operational value,
sdlcLSOperMAXOUT, until the link station is
cycled inactive.
An implementation can support only modulo 8,
only modulo 128, or both."
DEFVAL { 1 }
::= { sdlcLSAdminEntry 9 }
sdlcLSAdminMODULO OBJECT-TYPE
SYNTAX INTEGER
{
eight(8),
onetwentyeight(128)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the modulus for an SDLC
link station. This modulus determines the size
of the rotating acknowledgement window used the
SDLC link station pair.
A write operation to this administered value
will not change the operational value,
sdlcLSOperMODULO, until the link station is
cycled inactive.
An implementation can support only modulo 8,
only modulo 128, or both."
DEFVAL { eight }
::= { sdlcLSAdminEntry 10 }
sdlcLSAdminRETRIESm OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls number of retries in a
retry sequence for the local SDLC link
station. A retry sequence is a series of
retransmitted frames ( data or control) for
which no positive acknowledgement is received.
The number of times that the retry sequence is
to be repeated is controlled by the object:
sdlcLSAdminRETRIESn. The interval between retry
sequences is controlled by the object:
sdlcLSAdminRETRIESt.
A value of zero indicates no retries. If the
value of sdlcLSAdminRETRIESm is zero, then the
values of sdlcLSAdminRETRIESt and
sdlcLSAdminRETRIESn should also be zero.
Depending on the implementation, a write
operation to this administered value may not
change the operational value,
sdlcLSOperRETRIESm, until the link station is
cycled inactive."
DEFVAL { 15 }
::= { sdlcLSAdminEntry 11 }
sdlcLSAdminRETRIESt OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the interval (in 1/100ths
of a second) between retry sequences for the
local SDLC link station if multiple retry
sequences are specified . A retry sequence is
a series of retransmitted frames ( data or
control) for which no positive acknowledgement
is received.
The number of repeated retries sequences is
controlled by the object: sdlcLSAdminRETRIESn.
The retries per sequence is controlled by the
object: sdlcLSAdminRETRIESm.
The object descriptor contains the name of an
NCP configuration parameter, RETRIESt. Please
note that the value of this object represents
1/100ths of a second while the NCP RETRIESt is
represented in seconds.
Depending on the implementation, a write
operation to this administered value may not
change the operational value,
sdlcLSOperRETRIESt, until the link station is
cycled inactive."
DEFVAL { 0 }
::= { sdlcLSAdminEntry 12 }
sdlcLSAdminRETRIESn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the number of times that
a retry sequence is repeated for the local SDLC
link station. A retry sequence is a series of
retransmitted frames ( data or control) for
which no positive acknowledgement is received.
The interval between retry sequences is
controlled by the object: sdlcLSAdminRETRIESn.
The retries per sequence is controlled by the
object: sdlcLSAdminRETRIESm.
Depending on the implementation, a write
operation to this administered value may not
change the operational value,
sdlcLSOperRETRIESn, until the link station is
cycled inactive."
DEFVAL { 0 }
::= { sdlcLSAdminEntry 13 }
sdlcLSAdminRNRLIMIT OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the length of time (in
1/100ths of a second) that an SDLC link station
will allow its adjacent link station to remain
in a busy (RNR) state before declaring it
inoperative.
A value of sdlcLSAdminRNRLIMIT == 0 means there
is no limit.
The object descriptor contains the name of an
NCP configuration parameter, RNRLIMIT. Please
note that the value of this object represents
1/100ths of a second while the NCP RNRLIMIT is
represented in minutes.
Depending on the implementation, a write
operation to this administered value may not
change the operational value,
sdlcLSOperRNRLIMIT, until the link station is
cycled inactive."
DEFVAL { 18000 }
::= { sdlcLSAdminEntry 14 }
sdlcLSAdminDATMODE OBJECT-TYPE
SYNTAX INTEGER
{
half(1),
full(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls whether communications
mode with the adjacent link station is
two-way-alternate (half) or two-way-simultaneous
(full).
A write operation to this administered value
will not change the operational value,
sdlcLSOperDATMODE, until the link station is
cycled inactive."
DEFVAL { half }
::= { sdlcLSAdminEntry 15 }
sdlcLSAdminGPoll OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the group poll address
for this link station instance. If group poll
is not in effect for this link station
instance, the value for sdlcLSAdminGPoll should
be zero.
Depending on the implementation, a write
operation to this administered value may not
change the operational value, sdlcLSOperGPoll,
until the link station is cycled inactive."
::= { sdlcLSAdminEntry 16 }
sdlcLSAdminSimRim OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the support for
transmission and receipt of SIM and RIM control
frames for this link station. The value of
this object controls the setting of the
transmit-receive capability sent in the XID
field."
DEFVAL { no }
::= { sdlcLSAdminEntry 17 }
sdlcLSAdminXmitRcvCap OBJECT-TYPE
SYNTAX INTEGER
{
twa(1),
tws(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the transmit-receive
capabilities for this SDLC link station. The
value of this object establishes the value of
the transmit-receive capability indicator sent
in the XID image to the adjacent link station."
DEFVAL { twa }
::= { sdlcLSAdminEntry 18 }
sdlcLSAdminRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used by a management station to
create or delete the row entry in
sdlcLSAdminTable following the RowStatus
textual convention.
Upon successful creation of the row, an agent
automatically creates a corresponding entry in
the sdlcLSOperTable with sdlcLSOperState equal
to 'discontacted (1)'."
::= { sdlcLSAdminEntry 19 }
-- *************************************************************
-- * *
-- * THE SDLC LINK STATION OPERATIONAL TABLE *
-- * *
-- *************************************************************
sdlcLSOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcLSOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current SDLC link
parameters. Many of these objects have
corresponding objects in the
sdlcLSAdminTable."
::= { sdlcLSGroup 2 }
sdlcLSOperEntry OBJECT-TYPE
SYNTAX SdlcLSOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of status and control values for an
SDLC link station."
INDEX { ifIndex, sdlcLSAddress }
::= { sdlcLSOperTable 1 }
SdlcLSOperEntry ::= SEQUENCE
{
sdlcLSOperName DisplayString,
sdlcLSOperRole INTEGER,
sdlcLSOperState INTEGER,
sdlcLSOperMAXDATASend Integer32,
sdlcLSOperREPLYTO TimeInterval,
sdlcLSOperMAXIN INTEGER,
sdlcLSOperMAXOUT INTEGER,
sdlcLSOperMODULO INTEGER,
sdlcLSOperRETRIESm INTEGER,
sdlcLSOperRETRIESt TimeInterval,
sdlcLSOperRETRIESn INTEGER,
sdlcLSOperRNRLIMIT TimeInterval,
sdlcLSOperDATMODE INTEGER,
sdlcLSOperLastModifyTime TimeTicks,
sdlcLSOperLastFailTime TimeTicks,
sdlcLSOperLastFailCause INTEGER,
sdlcLSOperLastFailCtrlIn OCTET STRING,
sdlcLSOperLastFailCtrlOut OCTET STRING,
sdlcLSOperLastFailFRMRInfo OCTET STRING,
sdlcLSOperLastFailREPLYTOs Counter32,
sdlcLSOperEcho INTEGER,
sdlcLSOperGPoll INTEGER,
sdlcLSOperSimRim INTEGER,
sdlcLSOperXmitRcvCap INTEGER
}
sdlcLSOperName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string that defines the name of the
remote SDLC link station. This field is
received in the XID3 control vector 0x0E, type
0xF7."
::= { sdlcLSOperEntry 1 }
sdlcLSOperRole OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
undefined(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command."
::= { sdlcLSOperEntry 2 }
sdlcLSOperState OBJECT-TYPE
SYNTAX INTEGER
{
discontacted(1),
contactPending(2),
contacted(3),
discontactPending(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the operational state of
the SDLC link station. The managed system
shall attempt to keep this value consistent
with the administered state, sdlcLSAdminState"
::= { sdlcLSOperEntry 3 }
sdlcLSOperMAXDATASend OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the actual maximum PDU
size that the local link station can send to
the adjacent link station. This object is
established from the value received in the XID
from the adjacent link station. If no XID
is received, then this value is implementation
dependent (for instance, it could be the value
of sdlcLSAdminMAXDATASend).
This value includes the Transmission Header
(TH) and the Request Header (RH)."
::= { sdlcLSOperEntry 4 }
sdlcLSOperREPLYTO OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current reply timeout
(in 1/100ths of a second) for an SDLC link
station. If the link station does not receive
a response to a poll or message before the
specified time expires then the appropriate
error recovery shall be initiated.
The object descriptor contains the name of an
NCP configuration parameter, REPLYTO. Please
note that the value of this object represents
1/100ths of a second while the NCP REPLYTO is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where sdlcPortOperRole == primary "
::= { sdlcLSOperEntry 5 }
sdlcLSOperMAXIN OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current maximum
number of unacknowledged I-frames which an SDLC
link station may receive. This shall range
from 1 to (sdlcLSOperMODULO - 1)."
::= { sdlcLSOperEntry 6 }
sdlcLSOperMAXOUT OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange."
::= { sdlcLSOperEntry 7 }
sdlcLSOperMODULO OBJECT-TYPE
SYNTAX INTEGER
{
eight(8),
onetwentyeight(128)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current modulus for
an SDLC link station. This modulus determines
the size of rotating acknowledgement window
used by the SDLC link station pair."
DEFVAL { eight }
::= { sdlcLSOperEntry 8 }
sdlcLSOperRETRIESm OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls number of retries in a
retry sequence for an SDLC link station. A
retry sequence is a series of retransmitted
frames ( data or control) for which no positive
acknowledgement is received.
The current number of times that the retry
sequence is to be repeated is reflected by the
object: sdlcLSOperRETRIESn. The current
interval between retry sequences is reflected
by the object: sdlcLSOperRETRIESt."
::= { sdlcLSOperEntry 9 }
sdlcLSOperRETRIESt OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current interval (in
1/100ths of a second) between retry sequences
for an SDLC link station if multiple retry
sequences are specified. A retry sequence is a
series of retransmitted frames ( data or
control) for which no positive acknowledgement
is received.
The object descriptor contains the name of an
NCP configuration parameter, RETRIESt. Please
note that the value of this object represents
1/100ths of a second while the NCP RETRIESt is
represented in seconds.
The current number of repeated retries
sequences is reflected by the object:
sdlcLSOperRETRIESn. The current retries per
sequence is reflected by the object:
sdlcLSOperRETRIESm."
::= { sdlcLSOperEntry 10 }
sdlcLSOperRETRIESn OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current number of
times that a retry sequence is repeated for an
SDLC link station. A retry sequence is a
series of retransmitted frames ( data or
control) for which no positive acknowledgement
is received.
The current interval between retry sequences is
reflected by the object: sdlcLSOperRETRIESn.
The current retries per sequence is reflected
by the object: sdlcLSOperRETRIESm."
::= { sdlcLSOperEntry 11 }
sdlcLSOperRNRLIMIT OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current length of
time (in 1/100ths of a second) that an SDLC
link station will allow its adjacent link
station to remain in a busy (RNR) state before
declaring it inoperative.
The object descriptor contains the name of an
NCP configuration parameter, RNRLIMIT. Please
note that the value of this object represents
1/100ths of a second while the NCP RNRLIMIT is
represented in minutes.
A value of sdlcLSOperRNRLIMIT == 0 means there
is no limit."
::= { sdlcLSOperEntry 12 }
sdlcLSOperDATMODE OBJECT-TYPE
SYNTAX INTEGER
{
half(1),
full(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects whether the current
communications mode with the adjacent link
station is two-way-alternate (half) or
two-way-simultaneous (full)."
::= { sdlcLSOperEntry 13 }
sdlcLSOperLastModifyTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the value of sysUpTime
when this link station definition was last
modified. If the link station has not been
modified, then this value shall be zero."
::= { sdlcLSOperEntry 14 }
sdlcLSOperLastFailTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the value of sysUpTime
when this SDLC link station last failed. If
the link station has not failed, then this
value shall be zero."
::= { sdlcLSOperEntry 15 }
sdlcLSOperLastFailCause OBJECT-TYPE
SYNTAX INTEGER
{
undefined(1),
rxFRMR(2),
txFRMR(3),
noResponse(4),
protocolErr(5),
noActivity(6),
rnrLimit(7),
retriesExpired(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This enumerated object reflects the cause of
the last failure of this SDLC link station. If
the link station has not failed, then this
object will have a value of undefined(1)."
DEFVAL { undefined }
::= { sdlcLSOperEntry 16 }
sdlcLSOperLastFailCtrlIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the last control octet or
octets (depending on modulus) received by this
SDLC link station at the time of the last
failure. If the link station has not failed,
then this value has no meaning."
::= { sdlcLSOperEntry 17 }
sdlcLSOperLastFailCtrlOut OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the last control octet or
octets (depending on modulus) sent by this SDLC
link station at the time of the last failure.
If the link station has not failed, then this
value has no meaning."
::= { sdlcLSOperEntry 18 }
sdlcLSOperLastFailFRMRInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the information field of
the FRMR frame if the last failure for this
SDLC link station was as a result of an invalid
frame. Otherwise, this field has no meaning."
::= { sdlcLSOperEntry 19 }
sdlcLSOperLastFailREPLYTOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the number of times that
the REPLYTO timer had expired for an SDLC link
station at the time of the last failure. If the
link station has not failed, then this value
has no meaning."
::= { sdlcLSOperEntry 20 }
sdlcLSOperEcho OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the echo bit is
in effect for this particular link station."
DEFVAL { no }
::= { sdlcLSOperEntry 21 }
sdlcLSOperGPoll OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the group poll address
in effect for this link station instance."
DEFVAL { 0 }
::= { sdlcLSOperEntry 22 }
sdlcLSOperSimRim OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the support for
transmission and receipt of SIM and RIM control
frames for the adjacent link station. The
value of this object is set from the XID field
received from the adjacent link station."
DEFVAL { no }
::= { sdlcLSOperEntry 23 }
sdlcLSOperXmitRcvCap OBJECT-TYPE
SYNTAX INTEGER
{
twa(1),
tws(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the transmit-receive
capabilities for the adjacent SDLC link
station. The value of this object is the value
of the transmit-receive capability indicator
received in the XID image from the adjacent
link station."
DEFVAL { twa }
::= { sdlcLSOperEntry 24 }
-- *************************************************************
-- * *
-- * THE SDLC LINK STATION STATISTICS TABLE *
-- * *
-- *************************************************************
sdlcLSStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdlcLSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains statistics
for a specific SDLC link station."
::= { sdlcLSGroup 3 }
sdlcLSStatsEntry OBJECT-TYPE
SYNTAX SdlcLSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for an SDLC link station."
INDEX { ifIndex, sdlcLSAddress }
::= { sdlcLSStatsTable 1 }
SdlcLSStatsEntry ::= SEQUENCE
{
sdlcLSStatsBLUsIn Counter32,
sdlcLSStatsBLUsOut Counter32,
sdlcLSStatsOctetsIn Counter32,
sdlcLSStatsOctetsOut Counter32,
sdlcLSStatsPollsIn Counter32,
sdlcLSStatsPollsOut Counter32,
sdlcLSStatsPollRspsIn Counter32,
sdlcLSStatsPollRspsOut Counter32,
sdlcLSStatsLocalBusies Counter32,
sdlcLSStatsRemoteBusies Counter32,
sdlcLSStatsIFramesIn Counter32,
sdlcLSStatsIFramesOut Counter32,
sdlcLSStatsUIFramesIn Counter32,
sdlcLSStatsUIFramesOut Counter32,
sdlcLSStatsXIDsIn Counter32,
sdlcLSStatsXIDsOut Counter32,
sdlcLSStatsTESTsIn Counter32,
sdlcLSStatsTESTsOut Counter32,
sdlcLSStatsREJsIn Counter32,
sdlcLSStatsREJsOut Counter32,
sdlcLSStatsFRMRsIn Counter32,
sdlcLSStatsFRMRsOut Counter32,
sdlcLSStatsSIMsIn Counter32,
sdlcLSStatsSIMsOut Counter32,
sdlcLSStatsRIMsIn Counter32,
sdlcLSStatsRIMsOut Counter32,
sdlcLSStatsDISCIn Counter32,
sdlcLSStatsDISCOut Counter32,
sdlcLSStatsUAIn Counter32,
sdlcLSStatsUAOut Counter32,
sdlcLSStatsDMIn Counter32,
sdlcLSStatsDMOut Counter32,
sdlcLSStatsSNRMIn Counter32,
sdlcLSStatsSNRMOut Counter32,
sdlcLSStatsProtocolErrs Counter32,
sdlcLSStatsActivityTOs Counter32,
sdlcLSStatsRNRLIMITs Counter32,
sdlcLSStatsRetriesExps Counter32,
sdlcLSStatsRetransmitsIn Counter32,
sdlcLSStatsRetransmitsOut Counter32
}
sdlcLSStatsBLUsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total basic link
units (BLUs; frames) received from an adjacent
SDLC link station since link station startup.
At link station startup time, this object must
be initialized to zero."
::= { sdlcLSStatsEntry 1 }
sdlcLSStatsBLUsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total basic link
units (BLUs; frames), transmitted to an
adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 2 }
sdlcLSStatsOctetsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total octets received
from an adjacent SDLC link station since link
station startup. This object covers the
address, control, and information field of
I-Frames only. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 3 }
sdlcLSStatsOctetsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total octets
transmitted to an adjacent SDLC link station
since link station startup. This object covers
the address, control, and information field of
I-Frames only. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 4 }
sdlcLSStatsPollsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total polls received
from an adjacent SDLC link station since link
station startup. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 5 }
sdlcLSStatsPollsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total polls sent to
an adjacent SDLC link station since link
station startup. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 6 }
sdlcLSStatsPollRspsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of poll
responses sent to the adjacent SDLC link
station since link station startup. This value
includes I-frames that are sent in response to
a poll.
At link station startup time, this object must
be initialized to zero."
::= { sdlcLSStatsEntry 7 }
sdlcLSStatsPollRspsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of poll
responses received from the adjacent SDLC link
station since station startup. This value
includes I-frames that are received in response
to a poll.
At link station startup time, this object must
be initialized to zero."
::= { sdlcLSStatsEntry 8 }
sdlcLSStatsLocalBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of times
that the local SDLC link station has entered a
busy state (RNR) since link station startup.
At link station startup time, this object must
be initialized to zero."
::= { sdlcLSStatsEntry 9 }
sdlcLSStatsRemoteBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of times
that an adjacent ( remote) SDLC link station
has entered a busy state (RNR) since link
station startup. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 10 }
sdlcLSStatsIFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total I-frames
received from an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 11 }
sdlcLSStatsIFramesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total I-frames
transmitted to an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 12 }
sdlcLSStatsUIFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total UI-frames
received from an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 13 }
sdlcLSStatsUIFramesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total UI-frames
transmitted to an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 14 }
sdlcLSStatsXIDsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total XID frames
received from an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 15 }
sdlcLSStatsXIDsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total XID frames
transmitted to an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 16 }
sdlcLSStatsTESTsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total TEST frames,
commands or responses, received from an
adjacent SDLC link station since link station
startup."
::= { sdlcLSStatsEntry 17 }
sdlcLSStatsTESTsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total TEST frames,
commands or responses, transmitted to an
adjacent SDLC link station since link station
startup."
::= { sdlcLSStatsEntry 18 }
sdlcLSStatsREJsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total REJ frames
received from an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 19 }
sdlcLSStatsREJsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total REJ frames
transmitted to an adjacent SDLC link station
since link station startup."
::= { sdlcLSStatsEntry 20 }
sdlcLSStatsFRMRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total frame reject
(FRMR) frames received from an adjacent SDLC
link station since link station startup."
::= { sdlcLSStatsEntry 21 }
sdlcLSStatsFRMRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total frame reject
(FRMR) frames transmitted to an adjacent SDLC
link station since link station startup."
::= { sdlcLSStatsEntry 22 }
sdlcLSStatsSIMsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total set
initialization mode (SIM) frames received from
an adjacent SDLC link station since link station
startup."
::= { sdlcLSStatsEntry 23 }
sdlcLSStatsSIMsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total set
initialization mode (SIM) frames transmitted to
an adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 24 }
sdlcLSStatsRIMsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total request
initialization mode (RIM) frames received from
an adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 25 }
sdlcLSStatsRIMsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total request
initialization mode (RIM) frames transmitted to
an adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 26 }
sdlcLSStatsDISCIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
disconnect (DISC) requests received from an
adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 27 }
sdlcLSStatsDISCOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
disconnect (DISC) requests transmited to an
adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 28 }
sdlcLSStatsUAIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
unnumbered acknowledgements (UA) requests
received from an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 29 }
sdlcLSStatsUAOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
unnumbered acknowledgements (UA) requests
transmited to an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 30 }
sdlcLSStatsDMIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
disconnect mode (DM) requests received from an
adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 31 }
sdlcLSStatsDMOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
disconnect mode (DM) requests transmited to an
adjacent SDLC link station since link station
startup. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 32 }
sdlcLSStatsSNRMIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
set normal response mode (SNRM/SNRME) requests
received from an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 33 }
sdlcLSStatsSNRMOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
set normal response mode (SNRM/SNRME) requests
transmited to an adjacent SDLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 34 }
sdlcLSStatsProtocolErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total occurrences,
since link station startup, where this SDLC
link station has inactivated the link as a
result of receiving a frame from its adjacent
link station which was in violation of the
protocol. At link station startup time, this
object must be initialized to zero."
::= { sdlcLSStatsEntry 35 }
sdlcLSStatsActivityTOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total occurrences,
since startup, where this SDLC link station has
inactivated the link as a result of no activity
on the link. At link station startup time,
this object must be initialized to zero."
::= { sdlcLSStatsEntry 36 }
sdlcLSStatsRNRLIMITs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total occurrences,
since startup, where this SDLC link station has
inactivated the link as a result of its
RNRLIMIT timer expiring. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 37 }
sdlcLSStatsRetriesExps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total occurrences,
since startup, where this SDLC link station has
inactivated the link as a result of a retry
sequence being exhausted. At link station
startup time, this object must be initialized
to zero."
::= { sdlcLSStatsEntry 38 }
sdlcLSStatsRetransmitsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
information frames retransmitted by the remote
link station because the N(s) received from
that link station indicated that one or more
information frames sent by that station were
lost. This event causes the first missing
information frame of a window and all
subsequent information frames to be
retransmitted. At link station startup time,
this object must be initialized to zero.
Management: If the value of
sdlcLSStatsRetransmitsIn grows over time, then
the quality of the serial line is in
question. You might want to look at
decreasing the value for
sdlcLSAdminMAXDATASend to compensate for the
lower quality line."
::= { sdlcLSStatsEntry 39 }
sdlcLSStatsRetransmitsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of
information frames retransmitted to a remote
link station because the N(r) received from
that link station indicated that one or more
information frames sent to that station were
lost. This event causes the first missing
information frame of a window and all
subsequent information frames to be
retransmitted. At link station startup time,
this object must be initialized to zero.
Management: If the value of
sdlcLSStatsRetransmitsOut grows over time,
then the quality of the serial line is in
question. You might want to look at
decreasing the value for sdlcLSAdminMAXDATASend
to compensate for the lower quality line."
::= { sdlcLSStatsEntry 40 }
--
-- TRAP DEFINITIONS
--
--
-- Notifications
--
sdlcTraps OBJECT IDENTIFIER ::= { sdlc 3 }
sdlcPortStatusChange NOTIFICATION-TYPE
OBJECTS { ifIndex,
ifAdminStatus,
ifOperStatus,
sdlcPortOperLastFailTime,
sdlcPortOperLastFailCause
}
STATUS current
DESCRIPTION
"This trap indicates that the state of an SDLC
port has transitioned to active or inactive."
::= { sdlcTraps 1 }
sdlcLSStatusChange NOTIFICATION-TYPE
OBJECTS { ifIndex,
sdlcLSAddress,
sdlcLSOperState,
sdlcLSAdminState,
sdlcLSOperLastFailTime,
sdlcLSOperLastFailCause,
sdlcLSOperLastFailFRMRInfo,
sdlcLSOperLastFailCtrlIn,
sdlcLSOperLastFailCtrlOut,
sdlcLSOperLastFailREPLYTOs
}
STATUS current
DESCRIPTION
"This trap indicates that the state of an SDLC
link station has transitioned to contacted or
discontacted."
::= { sdlcTraps 2 }
--
-- Conformance Information
--
sdlcConformance OBJECT IDENTIFIER ::= { sdlc 4 }
sdlcCompliances OBJECT IDENTIFIER ::= { sdlcConformance 1 }
sdlcGroups OBJECT IDENTIFIER ::= { sdlcConformance 2 }
--
-- Compliance Statements
--
sdlcCoreCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The core compliance statement for all SDLC
nodes."
MODULE
MANDATORY-GROUPS
{
sdlcCorePortAdminGroup,
sdlcCorePortOperGroup,
sdlcCorePortStatsGroup,
sdlcCoreLSAdminGroup,
sdlcCoreLSOperGroup,
sdlcCoreLSStatsGroup
}
OBJECT sdlcPortAdminName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcPortAdminRole
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcPortAdminType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcPortAdminTopology
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcPortAdminISTATUS
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminState
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminISTATUS
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminMAXDATASend
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminMAXDATARcv
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminMAXIN
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminMAXOUT
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminMODULO
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminRETRIESm
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminRETRIESt
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminRETRIESn
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminRNRLIMIT
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminDATMODE
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminGPoll
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminSimRim
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { sdlcCompliances 1 }
sdlcPrimaryCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for all nodes that
are performing the role of a Primary link
station."
MODULE
MANDATORY-GROUPS { sdlcPrimaryGroup }
OBJECT sdlcPortAdminPAUSE
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcLSAdminREPLYTO
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { sdlcCompliances 2 }
sdlcPrimaryMultipointCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for all nodes that
are performing the role of a primary link
station on a multipoint line."
MODULE
MANDATORY-GROUPS { sdlcPrimaryMultipointGroup }
OBJECT sdlcPortAdminSERVLIM
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT sdlcPortAdminSlowPollTimer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { sdlcCompliances 3 }
--
-- Core Conformance Groups for All Link Stations
--
sdlcCoreGroups OBJECT IDENTIFIER ::= { sdlcGroups 1 }
sdlcCorePortAdminGroup OBJECT-GROUP
OBJECTS
{
sdlcPortAdminName, sdlcPortAdminRole,
sdlcPortAdminType, sdlcPortAdminTopology,
sdlcPortAdminISTATUS
}
STATUS current
DESCRIPTION
"The sdlcCorePortAdminGroup defines objects
which are common to the PortAdmin group of all
compliant link stations."
::= { sdlcCoreGroups 1 }
sdlcCorePortOperGroup OBJECT-GROUP
OBJECTS
{
sdlcPortOperName,
sdlcPortOperRole,
sdlcPortOperType,
sdlcPortOperTopology,
sdlcPortOperISTATUS,
sdlcPortOperACTIVTO,
sdlcPortOperLastFailTime,
sdlcPortOperLastFailCause
}
STATUS current
DESCRIPTION
"The sdlcCorePortOperGroup defines objects
which are common to the PortOper group of all
compliant link stations."
::= { sdlcCoreGroups 2 }
sdlcCorePortStatsGroup OBJECT-GROUP
OBJECTS
{
sdlcPortStatsPhysicalFailures,
sdlcPortStatsInvalidAddresses,
sdlcPortStatsDwarfFrames
}
STATUS current
DESCRIPTION
"The sdlcCorePortStatsGroup defines objects
which are common to the PortStats group of all
compliant link stations."
::= { sdlcCoreGroups 3 }
sdlcCoreLSAdminGroup OBJECT-GROUP
OBJECTS
{
sdlcLSAddress,
sdlcLSAdminName,
sdlcLSAdminState,
sdlcLSAdminISTATUS,
sdlcLSAdminMAXDATASend,
sdlcLSAdminMAXDATARcv,
sdlcLSAdminMAXIN,
sdlcLSAdminMAXOUT,
sdlcLSAdminMODULO,
sdlcLSAdminRETRIESm,
sdlcLSAdminRETRIESt,
sdlcLSAdminRETRIESn,
sdlcLSAdminRNRLIMIT,
sdlcLSAdminDATMODE,
sdlcLSAdminGPoll,
sdlcLSAdminSimRim,
sdlcLSAdminRowStatus
}
STATUS current
DESCRIPTION
"The sdlcCorePortAdminGroup defines objects
which are common to the PortAdmin group of all
compliant link stations."
::= { sdlcCoreGroups 4 }
sdlcCoreLSOperGroup OBJECT-GROUP
OBJECTS
{
sdlcLSOperRole,
sdlcLSOperState,
sdlcLSOperMAXDATASend,
sdlcLSOperMAXIN,
sdlcLSOperMAXOUT,
sdlcLSOperMODULO,
sdlcLSOperRETRIESm,
sdlcLSOperRETRIESt,
sdlcLSOperRETRIESn,
sdlcLSOperRNRLIMIT,
sdlcLSOperDATMODE,
sdlcLSOperLastFailTime,
sdlcLSOperLastFailCause,
sdlcLSOperLastFailCtrlIn,
sdlcLSOperLastFailCtrlOut,
sdlcLSOperLastFailFRMRInfo,
sdlcLSOperLastFailREPLYTOs,
sdlcLSOperEcho,
sdlcLSOperGPoll
}
STATUS current
DESCRIPTION
"The sdlcCorePortOperGroup defines objects
which are common to the PortOper group of all
compliant link stations."
::= { sdlcCoreGroups 5 }
sdlcCoreLSStatsGroup OBJECT-GROUP
OBJECTS
{
sdlcLSStatsBLUsIn,
sdlcLSStatsBLUsOut,
sdlcLSStatsOctetsIn,
sdlcLSStatsOctetsOut,
sdlcLSStatsPollsIn,
sdlcLSStatsPollsOut,
sdlcLSStatsPollRspsIn,
sdlcLSStatsPollRspsOut,
sdlcLSStatsLocalBusies,
sdlcLSStatsRemoteBusies,
sdlcLSStatsIFramesIn,
sdlcLSStatsIFramesOut,
sdlcLSStatsRetransmitsIn,
sdlcLSStatsRetransmitsOut,
sdlcLSStatsUIFramesIn,
sdlcLSStatsUIFramesOut,
sdlcLSStatsXIDsIn,
sdlcLSStatsXIDsOut,
sdlcLSStatsTESTsIn,
sdlcLSStatsTESTsOut,
sdlcLSStatsREJsIn,
sdlcLSStatsREJsOut,
sdlcLSStatsFRMRsIn,
sdlcLSStatsFRMRsOut,
sdlcLSStatsSIMsIn,
sdlcLSStatsSIMsOut,
sdlcLSStatsRIMsIn,
sdlcLSStatsRIMsOut,
sdlcLSStatsProtocolErrs,
sdlcLSStatsRNRLIMITs,
sdlcLSStatsRetriesExps
}
STATUS current
DESCRIPTION
"The sdlcCorePortStatsGroup defines objects
which are common to the PortStats group of all
compliant link stations."
::= { sdlcCoreGroups 6 }
--
-- Conformance Groups for Primary Link Stations
--
sdlcPrimaryGroups OBJECT IDENTIFIER ::= { sdlcGroups 2 }
sdlcPrimaryGroup OBJECT-GROUP
OBJECTS
{
sdlcPortAdminPAUSE,
sdlcPortOperPAUSE,
sdlcLSAdminREPLYTO,
sdlcLSOperREPLYTO
}
STATUS current
DESCRIPTION
"The sdlcPrimaryGroup defines objects which
are common to all compliant primary link
stations."
::= { sdlcPrimaryGroups 1 }
sdlcPrimaryMultipointGroup OBJECT-GROUP
OBJECTS
{
sdlcPortAdminSERVLIM,
sdlcPortAdminSlowPollTimer,
sdlcPortOperSlowPollMethod,
sdlcPortOperSERVLIM,
sdlcPortOperSlowPollTimer
}
STATUS current
DESCRIPTION
"The sdlcPrimaryMultipointGroup defines objects
which are common to all compliant primary link
stations that are in a multipoint topology."
::= { sdlcPrimaryGroups 2 }
END
$.' ",# (7),01444 '9=82<.342ÿÛ C
2! !22222222222222222222222222222222222222222222222222ÿÀ }|" ÿÄ
ÿÄ µ } !1AQa "q2‘¡#B±ÁRÑð$3br‚
%&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyzƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚáâãäåæçèéêñòóôõö÷øùúÿÄ
ÿÄ µ w !1AQ aq"2B‘¡±Á #3RðbrÑ
$4á%ñ&'()*56789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz‚ƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚâãäåæçèéêòóôõö÷øùúÿÚ ? ÷HR÷j¹ûA <̃.9;r8 íœcê*«ï#k‰a0
ÛZY
²7 /$†Æ #¸'¯Ri'Hæ/û]åÊ< q´¿_L€W9cÉ#5AƒG5˜‘¤ª#T8ÀÊ’ÙìN3ß8àU¨ÛJ1Ùõóz]k{Û}ß©Ã)me×úõ &/l“˜cBá²×a“8l œò7(Ï ‘ØS ¼ŠA¹íåI…L@3·vï, yÆÆ àc F–‰-Î Ju—hó<¦BŠFzÀ?tãúguR‹u#
‡ { ~?Ú•£=n¾qo~öôüô¸¾³$õüÑ»jò]Mä¦
>ÎÈ[¢à–?) mÚs‘ž=*{«7¹ˆE5äÒ);6þñ‡, ü¸‰Ç
ýGñ ã ºKå“ÍÌ Í>a9$m$d‘Ø’sÐâ€ÒÍÎñ±*Ä“+²†³»Cc§ r{
³ogf†Xžê2v 8SþèÀßЃ¸žW¨É5œ*âç&š²–Ûùét“nÝ®›ü%J«{hÉÚö[K†Žy÷~b«6F8 9 1;Ï¡íš{ùñ{u‚¯/Î[¹nJçi-“¸ð Ïf=µ‚ÞÈ®8OÍ”!c H%N@<ŽqÈlu"š…xHm®ä<*ó7•…Á
Á#‡|‘Ó¦õq“êífÛüŸ•oNÚ{ËFý;– ŠÙ–!½Òq–‹væRqŒ®?„ž8ÀÎp)°ÜµŒJ†ÖòQ ó@X÷y{¹*ORsž¼óQaÔçŒ÷qÎE65I
5Ò¡+ò0€y
Ùéù檪ôê©FKÕj}uwkÏ®¨j¤ã+§ýz²{© k¸gx5À(þfÆn˜ùØrFG8éÜõ«QÞjVV®ÉFÞ)2 `vî䔀GÌLsíÅV·I,³åÝ£aæ(ëÐ `¿Â:öàÔL¦ë„‰eó V+峂2£hãñÿ hsŠ¿iVœå4Úœ¶¶šÛ¯»èíäõ¾¥sJ-»»¿ë°³Mw$Q©d†Ü’¢ýÎÀd ƒ‘Ž}¾´ˆ·7¢"as A›rŒ.v@ ÞÇj”Y´%Š–·– 5\ܲõåË2Hã×° * ¾d_(˜»#'<ŒîØ1œuþ!ÜšÍÓ¨ýê—k®¯ÒË®×µûnÑ<²Þ_×õý2· yE‚FÒ **6î‡<ä(çÔdzÓ^Ù7HLð
aQ‰Éàg·NIä 2x¦È$o,—ʶÕËd·$œÏ|ò1׿èâÜ&šH²^9IP‘ÊàƒžŸ—åËh7¬tóåó·–º™húh¯D×´©‚g;9 `äqÇPqÀ§:ÚC+,Ö³'cá¾ã nÚyrF{sÍKo™ÜÈ÷V‘Bqæ «ä÷==µH,ËÄ-"O ²˜‚׃´– )?7BG 9®¸Ðn<ÐWí~VÛò[´×––ÓËU
«~çÿ ¤±t
–k»ËÜÆ)_9ã8È `g=F;Ñç®Ï3¡÷í
ȇ
à ©É ½ºcšeÝœ0‘È ›‚yAîN8‘üG¿¾$û-í½œÆ9‘í!ˆ9F9ç xëøž*o_žIÆÖZò¥ÓºVùöõ¿w¦Ýˆæ• ´ÓYÄ®³ËV£êƒæõç?áNòîn.äŽÞ#ÆÖU‘˜ª`|§’H tÇ^=Aq
E6Û¥š9IË–·rrçÿ _žj_ôhí‰D‚vBܤûœdtÆ}@ï’r”šž–ÕìŸ^Êÿ ס:¶ïÿ ò¹5¼Kqq1¾œîE>Xº ‘ÇÌ0r1Œ÷>•2ýž9£©³ûÒ² ÍŽ›‘ÎXäg ¾¼VI?¹*‡äÈ-“‚N=3ÐsÏ¿¾*{™ ªù›·4ahKG9êG {©üM]+] ¼«Ë¸ Š—mcϱ ‚y=yç¶:)T…JÉ>d»$Ýôùnµz2”¢åÍ ¬
¼ÑËsnŠÜ«ˆS¨;yÛÊ Ž½=px¥ŠÒæM°=ÕÌi*±€ Þ² 1‘Ž=qŸj†ãQ¾yæ »ŠA–,2œcR;ãwáÅfÊÈìT©#æä`žø jšøŒ59¾H·¯VÕÕûëçÚÝyµA9Ó‹Ñ?Çúþºš—QÇ
ÔvòßNqù«¼!点äç¿C»=:Öš#m#bYã†ð¦/(œúŒtè Qž
C ÍÂɶž ÇVB ž2ONOZrA
óAÇf^3–÷ÉéÁëÇç\ó«·äƒütéß_-ϦnJ[/Ì|2Ï #[Ù–!’,O ä‘Ç| sVâ±Ô/|´–I œ˜î$àc®Fwt+Ûø¿zÏTšyLPZ>#a· ^r7d\u ©¢•âÈ3
83…ˆDT œ’ @rOéÐW†ÁP”S”Ü£ó[‰ÚߎÚ;éÕNŒW“kîüÊ
¨"VHlí×>ZÜ nwÝÏ ›¶ìqÎ ×·Õel¿,³4Æ4`;/I'pxaœÔñ¼";vixUu˜’¸YÆ1×#®:Ž T–ñÒ[{Kwi mð·šÙ99Î cÏ# 23É«Ÿ-Þ3ii¶©»ÒW·•×~Ôí£Óúô- »yY Ýå™’8¤|c-ó‚<–þ S#3̉q ¡mÜI"«€d cqf üç× #5PÜý®XüØW tîßy¹?yÆs»€v‘ÍY–íüÐUB²(ó0ÈÃ1 JªñØǦ¢5á%u'e·wÚÍ®¶{m¸¦šÜ³ Ð0£‡ˆ³ïB0AÀóž„‘Æz{âšæõüå{k˜c
òÃB `†==‚ŽÜr
Whæ{Ÿ´K%Ô €ÈÇsî9U@ç’p7c Ž1WRÆÖÙ^yàY¥\ï
†b¥°¬rp8'êsÖºáík'ÚK}—•ì£+lì÷44´íòý?«Ö÷0¤I"Ú³.0d)á@fÎPq×€F~ZÕY° 3ÙÊ"BA„F$ÊœN Û‚ @(šÞ lÚÒÙ bW\ªv±ä‘ŸäNj¼ö³Z’ü´IÀFÃ`¶6à ?!
NxÇÒ©Ò†Oª²½’·ŸM¶{êºjÚqŒ©®èþ
‰ ’&yL%?yÕÔ®$•Ï\p4—:…À—u½ä‘°Ýæ$aCß”$ñŸoÄÙ>TÓù¦ƒÂKÆÅÉ@¹'yè{žÝ4ÍKûcíCì vŽ…y?]Ol©Ê|Íê¾Þ_;üÿ Ï¡Rçånÿ rÔ’[m²»˜¡Ž4ùDŽ›Ë) $’XxËëšY8¹i•†Á!‘þpJ•V^0
Œ±õèi²Å ²en%·„†8eeù²Yˆ,S†=?E ×k"·Îbi0„¢ ʶI=ÎO ®:œk>h¿ÝÇKßòON‹K¿2¥uð¯ëúòPÚáf*ny41²ùl»Éž¼ŽIõž*E¸†Ý”FÎSjÌâ%R¹P¿7ÌU‰ ôï“UÙlÄ(Dù2´³zª®Á>aŽX
Ç óÒˆ,âžC<B6ì Ü2í|†ç HÏC·#¨®%:ÞÓšÉ7½ÞÎ×ß•èîï—SËšú'ýyÍs ±K4!Ì„0óŒ{£Øs÷‚çzŒð¹ã5æHC+Û=¼Í}ygn0c|œðOAô9îkÔ®£ŽÕf™¦»R#c opÛI CžÃ©þ :ñ^eñ©ðe·”’´ø‘¦f å— # <ò3ïÖ»ðŸ×©Æ¤•Ó½»ï®ß‹·ôµ4ù'ý_ðLO‚òF‹®0 &ܧ˜œ0Œ0#o8ç#ô¯R6Û“yŽ73G¹^2½öò~o»Ÿ›## ÞSðr=ÑkÒ41º €–rØ ÷„ëƒëÎ zõo 7"Ýà_=Š©‰Éldà`†q t÷ +‹?æxù©%m,ö{.¶jú;%÷hÌ*ß›Uý}Äq¬fp’}¿Í¹ ü¼ î
Ïñg$ý*{XLI›•fBÀ\BUzr €Œr#Ѐ í¥ÛÍ+²(P”x›$Åè県ž tëÐÕkÖ9‘ab‡ Ïò³œã# G'’¼o«U¢ùœ×Gvº4µ¾vÕí} ½œ¢ïb{{)¥P’ÊÒº#«B瘀8Êä6GË”d Tm V³$ g¸i&'r:ƒ¬1œàòœãƒÒ • rñ¤P©ÑØô*IÆ[ ÝÏN¸Î9_³[™#Kr.Fí¤í*IÁ?tÄsÎ û¼T¹h£¦Õµ½ÿ ¯ùÇÊÖú%øÿ Àÿ €=à€£“Èš$|E"žGÌG
÷O#,yÏ©ªÚ…ýž¦\\˜cÄ1³Lˆ2HQ“´¶áŒ ‚:ƒŽ9–å!Š –͂ɾF''‘÷yÇNüûãëpÆ|=~¢D•äµ•vn2„sÓžGLë
IUP´Uíw®Ú-/mm£²×Ì–ìíeý] ? øÑüa¨ÞZÏeki,q‰c10PTpAÜÀg%zSß°2Ĥ¡U]®ØŠÜçžI;€èpx?_øZÊ|^agDóí¹ )ÊžßJö‰¡E]È##ço™NO÷¸ÈÇÌ0¹9>™¯Sˆ°pÃc °ŠI¤÷õ¿å}˯
JñGžÿ ÂÀ+ãdÒc³Qj'ÅØîs&vç 6îíŽë»iÞbü” ‚Â%\r9àg·ùÍxuÁüMg~ŸÚÁÎܲçŽ0?*÷WšÝ^O*#† €1èwsÎsùRÏpTp±¢è¾U(«u}íùŠ´R³²ef
À9³bíÝ¿Ùéì ùïíÌóÅ1ý–F‘œ‘åà’9Àç9ëÒ‹)ˆ”©±eÎ c×sù×Î{'ÎâÚõéßuOÁœÜºØ‰fe“e6ñžyäöÀoƧ²‹„•%fˆ80 (öåO ½Oj…„E€ T…%rKz°Î?.;{šXÙ‡ŸeUÚd!üx9þtã% wO_øoòcM-
j–ÒHX_iK#*) ž@Ž{ ôǽBd¹‰RÝn–ê0«7ˆìyÀ÷Í@¬Ì¢³³’ 9é÷½? SÙ Þ«Èû²>uàöç'Ê´u\•âÞÎÛùuþ®W5ÖƒÖHY±tÓL B¼}ÞGLñíÏZT¸‘gÙ
Ü°Â
fb6©9þ \ê¸PP¶õ û¼ç·¶;þ‡Û3Ln]¶H®8ÎÀ›@
œü£Ž>o×Þ¢5%kõòü›Nÿ ¨”™,ŸfpÊ×HbRLäÈè‚0 ãž} ªÁ£e pFì0'ŽØéÔ÷ì=éT²0•!…Îzt9ç¾? ”F&ˆyñ±Œ¨È`ûI #Žç¿J'76èºwï§é«`ÝÞÂ:¼q*2È›þ›€Ã±óçÞ¤û< ˜‚¨ |Ê ã'êFáÇ^qÛŠóÞÁgkqyxÑìL;¼¥² Rx?‡¯Y7PŽwnù¶†û¾Ü ·.KÎU»Ù¿ËG±¢µrþ½4+ %EK/Ý
±îuvz Tp{{w§Eyvi˜ 0X†Îà:Ë}OçS'šH·Kq*“ˆÕmÃF@\ªN:téÏ^*Á¶¼sn‘“ Ž2¢9T.½„\ ýò@>˜7NFïNRÓ·wèôßEÕu a'¬[þ¾cö¡ ÌOæ¦âÅŠ². Ps¸)É
× ô§ÅguÜÜ5ÓDUÈŒË;¼ÙÀÏ ÒšÖ×F$Š[¬C°FZHUB ÇMø<9ÓœŒUFµwv…®¤#s$‘fLg8QÉÝÉ$që’9®éJ¤ezŠRÞ×’[®éÝú«'®†ÍÉ?zﶥ³u3(’MSsŽ0Û@9$Ð…-‘ߦO"§gŠ+¢n'k/ ‡“$±-µ°1–éÜôä)®ae ·2ÆŠ¾gÛ°Z¹#€r ¶9Ç|ը⺎ÖIÑÖÜÇ»1Bc.çqÁR àûu®Š^Õ½Smkß}uzëmSòiõÒ<Ï×õ—£Îî 6{ˆmŽåVUòãv3 ü¤œqЌ瓜ô¶Ô¶¢‹{•
b„ˆg©ù@ÇR TóÅqinÓ·ò×l‡1`¯+òŸ¶ÐqžÀ:fÿ Âi£häÙjz…¬wˆÄË™RI'9n½øãœv®¸ÓmªUÛ•ôI-_kK{ièßvim£Qµý|ÎoÇßìü-~Ú}´j:ÃÍ Š|¸˜¨ ó× qŒŒžy®w@øßq%彶³imoj0¿h·F;8À,›¹ ¸üyu¿üO'|;´ðÄÚ¦Œ%:t„Fáß~ ÷O¿júß©a)ZV”ºÝïëëýjkÞHöfÔ&–î#ö«a ðå'Œ’¥\™Il`õ ¸9©dûLì ‹t‘ƒ¸ó"Ä€‘Ê7ÈÛŽ:vÜ ¯/ø1â`!»Ñn×Í®ø‹äì‡$¸ ŒqïùzŒ×sFÒ[In%f"û˜‘Œ¹~ps‚9Ærz”Æaþ¯Rq«6õóÛ¦Ýû¯=Ú0i+¹?ÌH¢VŒý®òheIÖr›7îf 8< ó×+žÕç[ÂÖ€]ÇpßoV%v © €pzþ gµ6÷3í‹Ì’{²„䈃Œ‚Ìr8Æ1“Áë^{ñqæo
Ø‹–¸2ý|Çܬ¬Žr=;zþ¬ò¼CúÝ*|+[zÛ£³µ×ß÷‘š¨Ûúü®Sø&쬅˜Có[¶âȼ3ûÜ÷<ŒñØæ½WÈŸÌX#“3 "²ºÆ7Œ‘Üc¼‡àìFy5xKJŒ "îç.r@ï×Þ½Ä-ÿ þ“}ª}’*Þ!,Fm¸Î@†9b?1W{Yæ3„`Ú¼VõŠÚÛ_kùöG.mhÎñ ôíhí§Ô$.ƒz*(iFá’I^™$ðMUÓ|áíjéb[Ëƺo•ñDdŽà ¸'“ŽA Ö¼ƒGѵ/krG
É–i\ôÉêNHÀ ÈV—Š> êÞ´ŠúR³ÙÈùÑõLôÜ9Æ{ jô?°°Kýš¥WíZ¿V—m6·E}{X~Æ?
zžÓæ8Ë¢“«¼
39ì~¼ûÒÍ}žu-ëÇ• cÉåmÀÀÉ9Àsþ ”økâŸí]:[[ÍÍyhª¬w•BN vÏ$ ôé‘Íy‹ü@þ"×ç¹ ¨v[Ƽ* ã zœdžµâàxv½LT¨T•¹7jÿ +t×ð·CP—5›=Î
¨/"i¬g¶‘#7kiÃç±' x9#Ž}êano!òKD‘ílï”('¿SÔð?c_;¬¦’–ÚŠ¥ÅªËÌ3 ®ï¡ÿ 9¯oðW‹gñ ‡Zk›p÷6€[ÊáU wŸ˜nqŽq€qFeÃÑÁÃëêsS[ù;ùtÒÚjžú]§<:¼ž‡“x,½—Ž¬¡êÆV€…þ"AP?ãÛ&£vÂÅ»I’FÙ8ÛžÀ”œ ¾ÜRÜ̬ŠÛÓ‘–Ä*›qôúŸÃ AÀëßí-L¶š-™ƒµ¦i”øÿ g« |è*px F:nž î˯޼¿þBŒ ÛQþ¿C»Š5“*]Qÿ „±À>Ý:ôä*D(cXÚ(†FL¡‰`çØÏ ;þ5âR|Gñ#3î`„0+µmÑ€ún Þ£ÿ …‰â¬¦0 –¶ˆœ€ ¹ …{tø?ʯ(_çþ_Š5XY[¡Ù|Q¿ú
µŠ2︛sO* Бÿ ×â°<+à›MkÂ÷š…ij
·Ü–ˆ«ò‚?ˆœúäc ½øåunû]¹Iïåè› ç ¯[ð&©¥Ýxn;6>}²’'`IË0ÁèN}zö5éâ©âr\¢0¥ñs^Ml¿«%®ýM$¥F•–ç‘Øj÷Ze¦£k
2¥ô"FqÀ` „~5Ùü+Ò¤—QºÕ†GÙ—Ë‹ çqä°=¶ÏûÔÍcᶡ/ˆ¤[ý†iK ™°"ó•Æp;`t¯MÑt}+@²¶Óí·Ídy’3mÕË‘’zc€0 íyÎq„ž ¬4×5[_]Rë{]ì¬UZ±p÷^åØÞÈ[©& OúÝÛ‚‚s÷zžIïßó btÎΪ\ya¾U;C¤t*IÎFF3Š¸™c
1žYD…U° êÄàõë\oŒ¼a ‡c[[GŽãP‘7 â znÈ>Ãü3ñ˜,=lUENŒäô¾ÚÀÓ[_ð9 œ´JçMy©E¢Àí}x,bpAó¦üdc ûŒW9?Å[Há$¿¹pÄ™#^9O88© zO=«Ë!µÖüY¨³ªÍy9ûÒ1 úôÚ»M?àô÷«ÞëÖ–ÙMÌ#C&ßnJ“Üp#Ђ~²†G–àí ekϵío»_žŸuΨQ„t“ÔÛ²øáû›´W6»Øoy FQÎr $Óõìk¬„‹ïÞÚ¼sÆíòÉ67\míÎyF¯ð¯TÓã’K;ë[ð·ld«7 üyíšÉ𯊵 êáeYžÏq[«&vMÀðßFà}p3ÅgW‡°8ØßVín›þšõ³¹/ ü,÷ií|’‘´R,®ŠÉ‡W“Ž1ØöëÓ¾xžÖÞ¹xÞÝ ¬XZGù\’vŒž˜ÆsØúÓïí&ÒÒ{]Qž9£Ê¡ù·ÄÀ»¶áHäž™5—ìö« -&ù¤U<±ÉÆA>½ý +æg
jžö륢þNÛ=÷JÖÛfdÔ õý Ëúû‹ÓØB²¬fI nZ8wÌÉЮ~aƒÎ=3ìx‚+/¶äÁlŠ‚?™Æü#8-œ\pqTZXtè%»»&ÚÝ#´ŠðÜ žã§Í’¼{p·ß {m>ÞycP¨’¼¢0ú(R ƒë^Ž ñó¼(»y%m´ÕÙ}ÊûékB1¨þÑ®,#Q)ó‡o1T©Üà *Ž‹‚yö< b‰4×H€“ìÐ.
¤²9ÌŠ>„Žãøgšñ
¯Š~)¸ßå\ÛÛoBŒa·L²œg$‚Iã¯ZÈ—Æ~%”äë—È8â)Œcƒ‘Âàu9¯b %)ÞS²¿Ïïÿ 4Öºù}Z/[ H%¤vÉ#Ì’x§†b
© ³´tÜ{gn=iï%õªÇç]ܧ—! åw„SÓp ·VÈÏ¡?5Âcâb¥_ĤŠz¬—nàþÖΟñKÄöJé=ÌWèêT‹¸÷ qÎჟ•q’zWUN«N/ØO^Ÿe|í¾©k{üõ4öV^ïù~G¹êzÂèº|·÷×[’Þ31†rpjg·n
Æ0Ý}kåË‹‰nîe¹ËÍ+™ ÏVbrOç]'‰¼o®xÎh`¹Ç*±ÙÚ!T$d/$žN>¼WqᯅZ9ÑÒO\ÜÛê1o&,-z ~^NCg NÕéá)ÒÊ©7‰¨¯'Õþ¯þ_¿Ehîþóâ €ï¬uÛûý*ÎK9ä.â-öv<²‘×h$àãúW%ö¯~«g-ÕõÀàG~>Zú¾Iš+(šM³ Û#9äl%ðc¬ ûÝ xÖKG´x®|¸¤Ï™ O:Ê8Ã’qÉcÔä‚yÇNJyËŒTj¥&µOmztjÿ ?KëaµÔù¯áýóXøãLeb¾tžAÇû`¨êGBA õ¾•:g˜’ù·,þhÀ`¬qÜ` e·~+å[±ý“âYÄjWì—µHé±ø?Nõô>½âX<5 Ç©Ï Ñ¼M¶8cܪXŽÉ^r?¼I róÈS•ZmÇ›™5»òÚÚ7ïu«&|·÷•Î†
>[©ÞXHeS$Œ yà€ ÷ù²:ò2|óãDf? Z¼PD¶ÓßC(xÆ0|©ßR;ô Msÿ µ´ÔVi¬,͹›Ìxâi˜`¹,GAéÇlV§ÄýF×Yø§ê–‘:Ã=ò2³9n±ÉžØÏ@yÎWžæ±Ãàe„ÄÒN ]ïòêìú_Go'¦ŽÑ’_×õЯðR66þ!›ÑÄ gFMÙ— äžäqôÈ;ÿ eX<#%»Aö‰ãR¤ Í”Ž¹È G&¹Ÿƒ&á?¶Zˆ±keRè Kãnz ·ãŠÕøÄÒÂ9j%@®×q±ÜŒ ý[õ-É$uíè&¤¶9zÇï·Oøï®ÄJKšÖìdü"µˆ[jײÎc;ã…B(g<9nàȯG½µŸPÓ.´Éfâ¼FŽP
31 ‘ÏR}<3šä~
Ã2xVöî Dr
Ç\›}Ý#S÷ÈÀëŽHÆI®à\OçKuäI¹†ó(”— G Wî ñ³¹¸æ2¨›‹ºÚû%¾ýÖ_3ºNú¯ëúì|ÕÅÖ‰}y lM’ZËîTÿ á[ ðÐñ/ˆ9Àû
¸ón3 Mòd‘÷ döª^.ÊñŽ°›BâîNp>cëÏçÍzïÃôÏ
YÍ%ª¬·ãÏ-*9ÜÂãhéŒc¾dÈêú¼Ë,. VŠ÷çeÿ n/¡¼äãõâ=‹xGQKx”|¹bÌŠD@2Œ 8'Ž àúƒŽ+áDÒ&¡¨"Œ§–Žr22 Ç·s]ŸÄ‹«ð%ÚÄ<¹ä’(×{e›HÀqÁç©Ç½`üŽÚõK饚9ƒÄ±€< – úƒú~ çðñO#Í%iKKlµ¦¾F)'Iê¬Î+Ç(`ñ¾£œdÈ’` ™ºcßéé^ÿ i¸”Û\ý¡æhÔB«aq¸}ãÀÆ:ÜWƒ|FÛÿ BŒÇÀeaŸ-sÊ€:úW½ÜÝÜ<%$µ†%CóDªÀí%IÈÏʤ…ôäñÞŒ÷‘a0“ôŽÚë¤nŸoW÷0«e¶y'Å»a Η2r’# Û°A^ý9ÉQÔõ=ù5 ¬£Öü.(Þ’M$ ~V«=éSÄFN½®©ÔWô»ÿ þHžkR‹ìÏ+µµžöê;khÚI¤m¨‹Ôš–âÖçJ¾_Z•’6 a” Èô> ÕÉaÕ<%®£2n bQŠå\tÈõUÿ ø»þ‹k15‚ÃuCL$ݹp P1=Oøýs¯^u éEJ”–éêŸê½5ýzy›jÛ ³á›Ûkÿ ÚOcn±ÛÏîW;boºz{ãžüVÆ¡a£a5½äÎÂks¸J@?1è¿{$ä‘=k”øsÖ^nŒ¦)ÝåXÃíùN1ØõÚOJë–xF÷h¸ Œ"Ž?x䜚ü³ì¨c*Fœ¯i;7~ñí׫Ðó¥Ë»3Ãü púw ‰°<Á%»ñž ÿ P+Û^ ¾Ye£ŽCÄŒ„/>˜ >•á¶Ìm~&&À>M[hÈÈÿ [Ž•íd…RO@3^Ç(ʽ*¶ÖQZyßþ
1Vº}Ñç?¼O4Rh6R€ª£í¡ûÙ
a‚3ß· Õ
ü=mRÍ/µ9¤‚0ÑC¼Iè:cŽsÛ¾™x£ÆЬªÍöˢ샒W$• €Å{¨ÀPG
ÀÀàŸZìÍ1RÉ0´ðxEË9+Éÿ ^rEÕ—±Š„70l¼áË@û.' ¼¹Žz€N3úUÉ<3á×*?²¬‚ä†"Ùc=p íÛ'¡ª 1ñ"økJ†HÒ'»Ÿ+
oÏN¬Ã9 dÙãÜדÏâÍ~æc+j·Jzâ7(£ð W]•æ™?nê´º6åwéåç÷N•ZŠíž›¬|?Ðõ?Ñ-E…®³Ç V$~X¯/…õ x‘LˆÑÜÚÈ7¦p zãÜüë½ðÄ^õtÝYËÍ7ÉÖÕ8ÏUe# #€r=sU¾/é’E§jRC4mxNÝ´9†íuá»›V‘
ZI€×cr1Ÿpzsøf»¨åV‹ìû`qËLÊIã?\~¼³á ËC©êhªOîO»‘ÃmçÛçút ×¢x“Z}?Ãœê#b-¤X7õ Äò gž zzbº3œ m*qvs·M=íúéw}¿&Úª°^Ö×µÏ(ø‡â†Öµƒenñý†×åQáYûœ÷ÇLœôÎNk¡ð‡¼/µ¸n0æÉ0¬ƒ‚üîÉÆvŒ w®Sáö”š¯‹-üÕVŠØÙ[$`(9cqƒÔ_@BëqûÙ`Ýæ0;79È?w<ó |ÙÜkßÌ1±Ëã ¿ìÒ»ðlìï«ÓnªèèrP´NÏš&Žéö Ù¸÷æ°~-_O'‰`°!RÚÚÝ%]Ø%þbß1'¿ÿ X ÕáOöÎŒ·‹¬+Åæ*ÛÛ™ 0¤ƒOÍÔ `u¯¦ÂaèÐÃÓ«‹¨Ô¥µœ¿¯ÉyÅÙ.oÔôŸ Úx&(STðݽ¦õ] ’ÒNóÁäÈùr3í·žÚ[™ƒ¼veÈ÷ÞIõÎGlqÎ=M|«gsªxÅI6
]Z·Îªä,¨zŒŽÄ~#ØŠúFñiÉqc©éÐD>S딑 G ñŽ1éÐ^+
Ëi;Ô„µVÕú»i¯ÈÒ-ZÍ]òܘ®ì` bÛÙ¥_/y(@÷ qÐúg Ô÷W0.Ø›
6Ò © r>QƒŒ0+Èîzb¨É+I0T bNñ"$~)ÕÒ6Þ‹{0VÆ27œ WWñcÄcX×íôûyKZéðªc' iQ¿¯LaW ŠŸS\·Š“źʸ…ôÙÂí |öÀÇåV|!¤ÂGâÛ[[’ï
3OrÙËPY¹=Î1õ5öåTžÑè Ú64/üö?Zëžk}¬¶éàoá¾á }3“ü]8Éæ¿´n²Žš_6¾pœ) 2?úWÓÚ¥¾¨iWúdŽq{*ª1rXŒd…m»‰äcô¯–dâ•ã‘Jº¬§¨#¨® §,df«8ÉÅßN¾hˆ;îÓ=7áùpën®É 6ûJžO2 ^œÐò JÖø¥²ã›Ò6Ü·‰!wbÍ‚¬O© »õ¬ÿ ƒP=Ä:â¤-& ÙŽ
` È9 r9íϧzë> XÅ7ƒ5X–krÑ¢L 7€ìw}ÑŸNHëŒüþ:2†á¼+u·á÷N/Û'Ðç~ߘô«ëh!ónRéeQ´6QÛÿ èEwëÅÒ|¸Yqó1uêyùzð8 ƒŠù¦Ò;¹ä6öi<'ü³„[ ÃZhu½ ùÍ¡g‚>r¯ ׊îÌx}bñ2“k꣧oø~›hTèóËWò4|ki"xßQ˜Ï6øÀLnß‚0 ¹Æ{±–¶Öe#¨27È@^Ìß.1N¾œyç€õ†ñeé·Õã†çQ°€=Ì©ºB€Ø8<‚à Sõ®ùcc>×Ú .Fr:žÝGæ=kÁâ,^!Fž
¬,àµ}%¶«îõ¹†"r²ƒGœüYÕd?aÑÃY®49PyU ÷þ!žxÅm|/‚ãNð˜¼PcûTÒ,¹/Ý=FkÏ|u¨¶«âë…{¤m¢]Û¾ïP>®XãÞ½i ÓÁ¾
‰'¬–6ß¼(„ï— í!ú Ùäzôë^–:œ¨å|,_¿&š×]uÓѵÛô4’j”bž§x‘Æ©ã›á,‚[Ô
ÎÞ= ŒËæ ÀùYÁ?ŽïÚ¼?ÁªxºÕÛ,°1¸‘¿Ýäãدv…@¤åq½ºã œàûââ· z8Xýˆþz~—û»™âµj=Ž
â~ãáh@'h¼F#·Üp?ŸëQü-løvépx»cŸø…lxâÃûG·‰¶ø”L£©%y?¦úõÆü-Õ¶¥y`Òl7>q’2üA?•F}c‡jB:¸Jÿ +§¹¿¸Q÷°ív= VÑìu[Qml%R7a×IèTõéŽx¬
?†š7
1†îã-ˆã’L¡lŽ0OÓ=ÅuˆpÇ• ¼3ÛùÒ¶W/!|’wŽw ^qÔ×Ïaó M8Q¨ãÑ?ëï0IEhÄa¸X•`a
?!ÐñùQ!Rä žqŽžÝO`I0ÿ J“y|ñ!Îã@99 >þ8–+éáu…!ù—ä
Ê°<÷6’I®z
ÅS„¾)Zþ_Öýµ×ËPåOwø ÷þ*üïænÖùmØÝûþ¹=>¦½öî×Jh]¼ç&@§nTŒ6IT Àõ^Fxð7Å3!Ö·aÛ$þÿ ¹ã5îIo:Ȫm ËY[’8ÇӾlj*òû¢¥xõ¾¼ú•åk+\ð¯ HÚoŽl•Ûk,¯ ç ²²cõÅ{²Z\
´ìQ åpzŽ3Ôð}ÿ Jð¯XO¡øÎé€hÙ¥ûLdŒ`““ù6Gá^ÃáÝ^Ë[Ñb¾YåŒÊ»dŽ4 †2§,;ÿ CQÄ´¾°¨c–±”mºV{«ßÕýÄW\ÖŸ‘çŸ,çMRÆí“l-ƒn~ë©ÉÈê Ü?#Ž•¹ðãSÒ¥ÐWNíà½;ãž)™ÎSÈ9cóLj뵿ūiÍk¨ió¶X‚7÷ƒ€yãnyÏŽëÞ Öt`×À×V's$È9Ú:ä{wÆEk€«†Çàc—â$éÎ.éí~Ýëk}ÅAÆpörÑ¢‡Šl¡ÑüSs ‹¨‰ I ÄóÀ×wñ&eºðf™pŒÆ9gŽTø£lñëÀçŽ NkÊUK0U’p ï^¡ãÈ¥´ø{£ÙHp`’ØåbqÏ©äó^Æ:
Ž' ÊóM«õz+ß×ó5Ÿ»('¹ð¦C„$˜Å¢_ºÈI?»^äã'ñêzž+ë€ñ-½»´}¡Ë*õ?.xÇ^1ŽMyǸ&“—L–îëöâ7…' bqéÎGé]˪â1$o²¸R8Ã`.q€}sÖ¾C98cêÆÞíïóòvÓòùœÕfÔÚéýuèÖ·Ú
Å‚_¤³ÜۺƑß”àר ý:׃xPþÅÕî-/üØmnQìïGΊÙRqê=>¢½õnæ·r!—h`+’;ò3È<“Û©éšóŸ x*÷V¹¸×tÈiˆßwiÔÿ |cŒñÏ®3Ö½ Ì°‰Ë Qr©ö½®¼ÛoÑÙZÅÑ«O൯ýw8;k›ÿ x†;ˆJa;‘º9÷÷R+¡ñgŽí|Iáë{ôáo2ʲ9 029ÉÏLí\‰¿¸Ÿb˜ "Bv$£&#ßiê>=ªª©f
’N ëí>¡NXW ~5×úíø\‰»½Ï^ø(—wÖú¥¤2íŽÞXæÁ$ °eÈ888^nÝë²ñÝÔ^ ÖÚ9Q~Ëå7ï
DC¶ÑµƒsË Çè9®Wáþƒ6‡£´·°2\Ý:ÈÑ? (#¨'$õèGJ¥ñW\ÿ ‰E¶—¸™g˜ÌÀ¹;Pv ú±ÎNs·ëŸ’–"Ž/:té+ûË]öJöÓM»ëø˜*‘•^Uý—êd| ‰åñMæÔÝ‹23å™6æHùÛ‚ëüñ^…ñ1¢oêûÑEØ.õ7*ÅHtÎp{g<·Á«+¸c¿¿pÓ¾Æby=8É_ÄsÆk¬ñB\jÞ Ôì••Ë[9Píb‹Bヅ =93§ð§LšÛáÖšÆæXÌÞdÛP.0\ãïÛ 0?™úJ¸™Ë
”•œº+=<µI£¦í¯õêt¬d‹T¬P=ËFêT>ÍØØ@Ï9<÷AQÌ×»Õ¡xùk",JÎæù±Éç$œŽŸZWH®¯"·UÌQ ’ÙÈ]ÅXg<ã
ߨg3-Üqe€0¢¨*Œ$܃
’Sû 8㎼_/e'+Ï–-èÓ¶¶Õíß[·ÙÙ½îì—¼sk%§µxä‰â-pÒeÆCr ú
ôσžû=”šÅô(QW‚Õd\ƒæ. \àö ¹¯F½°³½0M>‘gr÷q+œ¶NïºHO— ¤ ܥݔn·J|ÆP6Kµc=Isó}Ò çGš)a=—#vK›åoK§ßóÙ¤¶¿õú…ÄRÚ[ËsöÙ¼Ë•Ë ópw ®qœŒ·Ø
ùÇâ ‹ý‡ãKèS&ÞvûD Aù‘É9 Œî qÅ}
$SnIV[]Ñ´Ó}ØܾA Ü|½kÅþÓ|E Mu R¼.I¼¶däò‚ÃkÆ}ðy¹vc iUœZ…Õõ»z¾÷¿n¦*j-É/àœHã\y5 Û ß™ó0— äŸnzôã#Ô¯,†¥ÚeÔ÷ÜÅ´„“'c…<íÝ€< ·SŠ¥k§Ã¢éÆÆÙna‚8–=«Êª[Ÿ™°pNî02z“ÔÙ–K8.È’Þî(vƒ 2®@ ä Èûã çžxäÇf¯ˆu¹yUÕîýWšÙ|›ëÒ%Q^í[æ|éo5ZY•^{9 6ˆY‚§v*x>âº_|U¹Ö´©tûM ÒÂ9PÇ#«£# € éÉñ‘ƒÍz/‰´-į¹°dd,Б ›p03ƒœ{ç9=+
Ûᧇ¬¦[‡‚ê婺¸#±ß= ³ý¿•Õµjñ½HÙh›Û[§ÚýÊöô÷{˜?ô÷·Ô.u©–_%còcAÀ˜’
}0x9Î>žñÇáÍ9,ahï¦Ì2òÓ ñÛAäry$V²Nð
]=$Ž
‚#Ù‚1ƒƒødõ Max‡ÂÖ^!±KkÛ‘
«“Çó² FN8+ëÎ{Ò¼oí§[ «ÕMRoËeç×[_m/¦¦k.kôgŽxsSÓ´ý`êzªÜÜKo‰cPC9ÎY‰#§^üý9¹âïÞx£Ë·Ú`±‰‹¤;³–=ÏaôÕAð‚ ÷kêÁNBéÎælcõö®£Fð†ô2Ò¬]ßÂK$ÓÜ®•”/ÊHàã$ä ¸÷ëf¹Oµúâ“”’²øè´µþöjçNü÷üÌ¿ xNïFÒd»¼·h®îT9ŽAµÖ>qÁçÔœtïÒ»\ȶÎîcÞäîó3¶@#É IÎ ÔñW.<´’¥–ÑÑ€ÕšA‚ ;†qÓë‚2q
ÒÂó$# Çí‡
!Ë}Õ9ÈÎÑÉã=;ŒÇÎuñ+ÉûÏ¥öíeÙ+$úíÜ娯'+êZH4ƒq¶FV‹gïŒ208ÆÌ)íб>M|÷âÍã¾"iì‹¥£Jd´™OÝç;sÈúr+ÜäˆË)DŒ¥šF°*3Õ”d {zÔwºQ¿·UžÉf†~>I+ŒqÔ`ð3œ“Ü×f]œTÁÔn4“ƒø’Ýßõ_«*5šzGCÊ,þ+ê1ò÷O¶¸cœºb2y Ç ;cùÕ£ñh¬›áÑŠr¤ÝäNBk¥—á—†gxšX/쑘hŸ*Tçn =û㦠2|(ð¿e·ºÖ$
ýìŸ!'åÎ °yîî+×öœ=Y:²¦ÓÞ×iü’—ü
-BK™£˜›âÆ¡&véðõ-ûÉY¹=Onj¹ø¯¯yf4·±T Pó`çœ7={×mÃ/ ¢˜ZÚòK…G½¥b„’G AãÜœ *í¯Ã¿ IoæI¦NU8‘RwÈã;·€ Û×ëÒ”1Y
•£E»ÿ Oyto¢<£Áö·šï,ä‰ §ûA¼sû»Nò}¹üE{ÜÖªò1’õÞr0â}ÎØ#>à/8ïéÎ~—áÍ#ñÎlí§³2f'h”?C÷YËdð:qëõÓ·‚ïeÄ©
ÔÈØÜRL+žAÎ3¼g=åšó³Œt3
ÑQ¦ùRÙßE®¼±w_;þhš’Sirÿ ^ˆã¼iੇ|RòO„m°J/“$·l“ ÇÓ¿ÿ [ÑŠÆ“„†Õø>cFÆ6Ø1ƒ– àz7Ldòxäüwá‹ÝAXùO•Úý’é®ähm •NÀ±ÌTÈç
ƒ‘I$pGž:‚ÄbêW¢®œ´|¦nÍ>¶ÖÏ¢§ÎÜ¢ºö¹•%ÄqL^öÛ KpNA<ã¡ …î==ª¸óffËF‡yÌcÉ ©ç$ð=ñÏYþÊ’Ú]—¥‚¬‚eDïÎH>Ÿ_ÌTP™a‰ch['çÆÜò7a‡?w°Ïn§âÎ5”’¨¹uÚÛ|´ÓÓc§{O—ü1•ªxsÃZ…ÊÏy¡Ã3¸Ë2Èé» ‘ƒÎ äžÜðA§cáOéúÛ4ý5-fŒï„ù¬ûô.Ç Üsž•Ò¾•wo<¶Ÿ"¬¡º|£
î2sÇ¡éE²É FѱrU°dÜ6œ¨ mc†Îxë׺Þ'0²¡Rr„{j¾í·è›µ÷)º·å–‹î2|I®Y¼ºÍË·–ÃÆà ã£'óÆxƒOÆÞ&>\lóÌxP Xc ¸ì Sþ5§qà/ê>#žÞW¸if$\3 ® ûÄ“ùŽÕê¾ð< Ó‹H¶óÏ" å·( á‘€:ã†8Ï=+ꨬ UA×ÃËÚT’ÑÞöù¥¢]{»ms¥F0\ÑÕ—ô}&ÛB´ƒOŽÚ+›xíÄÀ1
,v± žIëíZ0ǧ™ 3 í2®0ภ—p9öÝÔž)ÓZËoq/Ú“‘L ²ŒmùŽï‘Ó9§[Û#Ä‘\ÞB¬Çs [;à à«g‚2ôòªœÝV§»·¯/[uó½õÛï¾
/šÍ}öüÿ « =x»HŸÂÞ.™ ÌQùŸh´‘#a$‚'¡u<Š›Æ>2>+ƒLSiöwµFó1!eg`£åœ ÷ëÛö}Á¿ÛVÙêv $¬ ƒ|,s÷z€ð΃¨x÷ÅD\Ü ŒÞmåÔ„ ˆ o| :{ÇÓ¶–òÁn!´0Ål€, ƒ ( ÛŒŒ c¶rsšæ,4‹MÛOH!@¢ ÇŽ„`å²9ÝÃw;AÍt0®¤¡…¯ØÄ .Àìí´ƒ‘ßñ5Í,Óëu-ÈÔc¢KÃÓ£òÖ̺U.õL¯0…%2È—"~x
‚[`có±nHàŽyàö™¥keˆìŒÛFç{(Ø©†`Jã#Žwg<“:ÚÉ;M
^\yhûX ‡vB·÷zrF?§BÊÔ/s< ÐÈB)Û± ·ÍÔwç5Âã:så§ e{mѤï«Òíh—]Wm4âí¿ùþW4bC3¶ª¾Ùr$ pw`àädzt!yŠI„hÂîàM)!e dŒm'æ>Ç?w zºKìcŒ´¯Ìq6fp$)ãw¡éUl`µ»ARAˆÝÕgr :äŒg ƒéé[Ôö±”iYs5Ýï«ÙG—K=þF’æMG«óÿ `ŠKɦuOQ!ÕåŒ/ÎGÞ`@ËqÕzdõâ«Ê/Ö(ƒK´%ŽbMü åÜŸö—>¤óŒŒV‘°„I ¢Yž#™¥ùÏÊ@8
œgqöö5ª4vד[¬(q cò¨À!FGaÁõõ¯? §†¥ÏU½í¿WªZ$úyú½ŽzקÉþ?>Ã×È•6°{™™ŽÙ.$`ÎU œ…çè ' ¤r$1Ø(y7 ðV<ž:È ÁÎMw¾Â'Øb§øxb7gãО½óÉÊë²,i„Fȹ £§8ãä½k¹¥¦ê/ç{ïê驪2œ/«ü?¯Ô›ìñÜ$þeýœRIåŒg9Ác’zrrNO bÚi¢
ѺË/$,“ª¯Ýä;Œ× ´<ÛÑn³IvŸb™¥ nm–ÄŸ—nÝÀãŽ3ëÍG,.öó³˜Ù£¹u ÊÌrŠ[<±!@Æ:c9ÅZh
ì’M5ÄìÌ-‚¼ëÉùqŽGì9¬á ;¨A-ž—évþÖ–^ON·Ô”ŸEý}ú×PO&e[]ÒG¸˜Ûp ƒÃà/Ë·8ûÀ€1ž@¿ÚB*²¼ñì8@p™8Q“žÆH'8 «I-%¸‚
F»“åó6°Uù|¶Ú¸ã ò^Äw¥ŠÖK–1ÜÝK,Žddlí²0PÀü“×ükG…¯U«·¶–´w¶ŽÍ¾©yÞú[Zös•¯Á[™6°
¨¼ÉVæq·,#
ìãï‘×8îry®A››¨,ãc66»Ë´ã'æÉù?t} ¢æH--Òá"›|ˆ¬[í 7¶ö#¸9«––‹$,+Ëqœ\Êø c€yê^ݸÄa°«™B-9%«×®‹V´w~vÜTéꢷþ¼ˆ%·¹• ’[xç•÷2gØS?6åÀÚ õ9É#š@÷bT¸º²C*3Bá¤òÎA9 =úU§Ó"2Ãlá 0i ÝIc‚2Î@% öç94ùô»'»HÄ¥Ô¾@à Tp£šíx:úÊ:5eºßMý×wµ›Ó_+šº3Ýyvÿ "ºÇ<ÂI>Õ 1G·Ë«È«É# àÈÇ øp Jv·šæDûE¿›†Ë’NFr2qŸ½ÇAÜšu•´éí#Ħ8£2”Ú2Ã/€[ÎTr;qŠz*ý’Îþ(≠;¡TÆâ›;ºÿ àçœ k‘Þ8¾Uª¾íé{^×IZéwÓkXÉûÑZo¯_øo×È¡¬ â–ÞR§2„‚Àœü½ùç® SVa†Âüª¼±D‘ŒísŸàä|ä 2 æ[‹z”¯s{wn„ÆmáóCO+†GO8Ïeçåº`¯^¼ðG5f{Xžä,k‰<á y™¥voÆ éÛõëI=œ1‹éíÔÀÑ)R#;AÂncäŽ: tÏ#¶TkB.0Œ-ÖÞZÛgumß}fÎJÉ+#2êÔP£žùÈÅi¢%œ3P*Yƒò‚Aì“Ž2r:ƒÐúñiRUQq‰H9!”={ ~¼ “JŽV¥»×²m.ÛߺiYl¾òk˜gL³·rT•
’…wHÁ6ä`–Î3ù Ì4Øe³†&òL‘•%clyîAÂäà0 žüç$[3uŘpNOÀÉ=† cï{rYK
ååä~FÁ
•a»"Lär1Ó¯ 2Äõæ< ™C•.fÕ»è¥~½-¿g½Â4¡{[ør¨¶·Žõäx¥’l®qpwÇ»8ärF \cŽ¸ÜÆÓ-g‚yciÏÀ¾rÎwèØÈ#o°Á9ã5¢šfÔxÞæfGusÏÌJÿ µ×œ/LtãÅT7²¶w,l
ɳ;”eúà·¨çîŒsÜgTÃS¦^ '~‹®›¯+k÷ZÖd©Æ*Ó[Ü«%Œk0ŽXƒ”$k#Ȩ P2bv‘ƒŸáÇ™ÆÕb)m$É*8óLE‘8'–ÜN Úyàúô+{uº±I'wvš4fÜr íì½=úuú
sFlìV$‘ö†HÑù€$§ õ=½¸«Ž]
:Ž+•¦ïmRþ½l´îÊT#nkiøÿ _ðÆT¶7Ò½ºÒ £Î¸d\ã8=yãŽÜ äR{x]ZâÚé#¸r²#» ÎHÆ6õ ç® ÎFkr;sºÄ.&;só± Ç9êH÷ýSšÕtÐU¢-n Ì| vqœ„{gŒt§S.P‹’Ž‰_[;m¥ÞZýRûÂX{+¥úü¼ú•-àÓ7!„G"“´‹žƒnrYXã¸îp éœ!ÓoPÌtÑ (‰Þ¹é€sÓ# GLçÕšÑnJý¡!‘Tä #“ß?îýp}xÇ‚I¥Õn#·¸–y'qó@r[ Êô÷<ÔWÃÓ¢áN¥4Ô’I&ݼ¬¬¼ÞºvéÆ
FQV~_ÒüJÖÚt¥¦Xá3BÄP^%ÈÎW-×c¡ú©¤·Iþèk¥š?–UQåIR[’O 5x\ÉhÆI¶K4«2ùªŠŒ<¼óœ çØ`u«‚Í.VHä € Ëgfx'' 9ÆI#±®Z8
sISºku¢ßÞ]úk»Jößl¡B.Ü»ÿ MWe
°·Ž%šêɆ¼»Âù³´œ O¿cÐ ÓÄh©"ÛÜÏ.ÖV ’3nüÄmnq[ŒòznšÖ>J¬òˆæ… qýØP Ž:ä7^0yëWšÍ_79äoaÈ °#q0{ää×m œy”R{vÒÞ¶ÚÏe¥“ÚÆХ̮—õýjR •íç›Ìb„+J yÜØÙ•Ç]¿Ôd þËO L²”9-Œ— õÃc'æÝלçÚ²ìejP“½
âù°¨†ðqòädЃÉäÖÜj÷PÇp“ÍšŠå«‘î
< iWNsmª»¶vÓz5»ûì:Rs\Ðßôû×uÔÿÙ